Collection
The new MDT security module prevents all connection-oriented accesses of the ETS, such as the programming and also the unloading of the bus devices, in the KNX line. This significantly increases the safety of the protected line in the inner and in the out
€161,17 Incl. tax
The MDT Logic Module is used for fast and easy compilation of Logic functions to control building automation systems. All the functions are parametrized directly in the ETS without additionally software tools. There are 24 independent function blocks with
€161,17 Incl. tax
KNX IP Router: This Interface offers the same functions as the IP interface, but the device routes telegrams as a line coupler using the the LAN.
€343,92 Incl. tax
The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.
€108,54 Incl. tax
The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a
€442,80 Incl. tax
The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads.
Each output uses relay (AKK-01UP.03: bistable relais, AKK-02/03UP.03: monostable relais).
€114,04 Incl. tax
The MDT LED Indicator allows to display universal logical and building functions.
€124,58 Incl. tax
Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext
€110,90 Incl. tax
The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.
€2.141,64 Incl. tax
The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.
€150,89 Incl. tax
The MDT KNX RF+ Wireless Line Coupler connects MDT KNX RF+ devices with the KNX bus. The line coupler has extensive filtering functions to minimize bus load on the wireless route.
€268,93 Incl. tax
The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.
€143,14 Incl. tax