Binary Inputs
Artikel 5238 IP Aktor and Interface
The KNX TP Multi IO 580 (48I/O) is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output.
€457,40 Incl. tax
Interface with 4 independent channels, which can work as Binary or Analog Input.
The Digital (Binary) inputs which may be conmnected to a conventional push-button, switch or binary sensor with free-voltage contact.
€85,85 Incl. tax
Per input one AC or DC contact in the range of 10...230 V
Per input direct operation function on the device for simulation of input status and indication oft the input status via LED
€138,42 Incl. tax
The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€185,61 Incl. tax
The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX
€159,84 Incl. tax
The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device
€83,31 Incl. tax
