Siemens

UP 287/13
Pushbutton, 4 fold with status LED, titanium white, DELTA style
Pushbutton in pair
Vertical operation
Per pushbutton selectable function
LED for orientation light
Connectable bus coupling unit (BTM) or flush-mounted actuators via BTM

UP 286/13
Pushbutton, 2 fold with status LED, titanium white, DELTA style
Pushbutton in pair
Vertical operation
Per pushbutton selectable function
LED for orientation light
Connectable bus coupling unit (BTM) or flush-mounted actuators via BTM

UP 285/13
Pushbutton, single, with status LED, titanium white, DELTA style
Pushbutton in pair
Vertical operation
Per pushbutton selectable function
LED for orientation light
Connectable bus coupling unit (BTM) or flush-mounted actuators via BTM

Ultrasound for reliable detection for ceiling installation indoors even behind objects
Additional detection options through PIR technology
Horizontal 360° motion detection area

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

Passive infrared detector for ceiling mounting indoors
Adjustable sensitivity of detection
Mixed light measurement

Compatible with USB 2.0 and USB 3.0
For isolated access to the bus line over the built-in USB socket (type B)
For connection of a PC for addressing,etc
Support of bus telegrams with up to 64 bytes length

The service interface consists of:
OCI702 service interface
USB 2.0 cable (Type A / B)
KNX service cable for Synco™ controllers (RJ45 / RJ45)
KNX service cable for Desigo™ TRA (RJ45 / jack plug 2.5 mm)
KNX service cable (RJ45 / KNX bus terminal)

For connection of a modular bus device to the bus line
10-pole BTI socket (BTI - Bus Transceiver Interface) for plugging of bus terminal devices with BTI connector

KNX Power supply unit DC 29 V, 640 mA with additional unchoked output, N 125/22

KNX Power supply unit DC 29 V, 320 mA with additional unchoked output, N 125/12

KNX Power supply unit DC 29 V, 160 mA with additional unchoked output, N 125/02

For data exchange between two KNX bus lines with telegrams of up to 64 byte
For use as line coupler for connecting a line to the main line or as backbone coupler for connecting a main line to the backbone....

8 slots for a sensor/actuator module, type RS or RL
Internal bus cable for connection of the sensor/actuator module to the bus

Touch control TC5 UP 205/22 black or white
Aluminium and glas housing
Capacitive touch colour display 5", 480 x 854 pixels
LED colour light strip as orientation light, respectively to signal alarms
Integrated room temperature sensor

QMX3.P37-1BSC
Room operator unit KNX with temperature sensor, segmented backlit display, configurable touchkeys, LED display, black

For mounting in AP 118 automation module box or AP 641 room control box

Rated contact current 10 AX

Four outputs for switching and dimming of resistive, inductive and capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715