Siemens

The service interface consists of:
OCI702 service interface
USB 2.0 cable (Type A / B)
KNX service cable for Synco™ controllers (RJ45 / RJ45)
KNX service cable for Desigo™ TRA (RJ45 / jack plug 2.5 mm)
KNX service cable (RJ45 / KNX bus terminal)

BACnet Application Specific Controller (B-ASC) as Gateway between KNX TP and BACnet IP
Up to 250 BACnet objects
Up to 455 BACnet COV subscriptions

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

Two DALI outputs with DALI-2 certification acc. to IEC 62386-101 and 103, each for communication with up to 64 DALI ballasts

Touch control TC5 UP 205/22 black or white
Aluminium and glas housing
Capacitive touch colour display 5", 480 x 854 pixels
LED colour light strip as orientation light, respectively to signal alarms
Integrated room temperature sensor

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

Four outputs for switching and dimming of resistive, inductive and capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V

IP Router Secure N 146/03 5WG1146-1AB03

8 inputs AC/DC 12...230 V
8 relay contact outputs
Rated contact voltage AC 230 V

Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 μF fluorescent lamp load)

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

QMX3.P37-1BSC
Room operator unit KNX with temperature sensor, segmented backlit display, configurable touchkeys, LED display, black

8 Inputs for AC/DC 12...230 V,
8 Inputs for floating contacts

For data exchange between two KNX bus lines with telegrams of up to 64 byte
For use as line coupler for connecting a line to the main line or as backbone coupler for connecting a main line to the backbone....

Brightness measurement, temperature measurement, sun protection control, lighting control
For the detection and transmission of brightness and temperature

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

KNX Power supply unit DC 29 V, 640 mA with additional unchoked output, N 125/22

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 µF fluorescent lamp load)

Two outputs for switching and dimming resistive, inductive or capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V

• 2 DALI outputs with DALI-2 certification
• Control capacity for up to 20 DALI-ECGs per DALI output
• DALI output voltage of 19 V, short circuit resistant

Electromotive, proportional (constant) valve actuator with LED valve position indication and with integrated bus coupling unit for direct connection to KNX:
For latching to valve adapter

KNX Power supply unit DC 29 V, 320 mA with additional unchoked output, N 125/12

Rated contact current 10 AX