Collection

The KNX IP Secure Router enables the forwarding of telegrams between different lines via a LAN (IP) network as a fast backbone. Furthermore, this device is suitable for connecting a PC to the KNX network, e.g. for ETS programming.

The KNX Secure CO KNT LC1 KNX Line Coupler is a KNX line coupler with a compact design. It connects two KNX segments (e.g. a KNX line with a KNX area).

This interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network.
Máx.Longframe APDU: 205

The KNX RF/TP Coupler is a compact KNX radio coupler.
It connects KNX RF devices of a radio line with the KNX Bus Twisted Pair.
The device has a filter table (8k byte). The coupler supports long frames

Wireless KNX-RF Motion Detectors, with Infrared detection technology, for recessed mounting in a false ceiling, powered by battery.
It has a highly sensitive PIR sensor, which, together with the lens design,

Wireless KNX-RF S-Mode Pushbutton Interface which allows the control of Switching, Dimming or Blinds Actuators.
Incorporates 2 inputs, each of which can be parameterized individually through the ETS:
Control of 1 or 2 independent output channels.

Dinuy FA KNT 001 KNX Power supply 640mA with auxiliary output

Multifunction actuator that can function as a regulator for RGBW LED strips with 4 input and output channels:
· Switching of 4 independent output channels
· Blinds/Awnings Actuator with 2 output channels
· 1 Fan-Coil Actuator with 2 tubes

2-channel Switching Actuator or 1-channel Blinds / Awnings Actuator.
Maximum switching capacity of up to 16A per channel, 2 voltage-free contacts.

4-channel Multi-function Switching Actuator or 2-channel Blinds/Shutters Actuator.
Incorporates 12 Inputs: 8-Binary Inputs + 4-Binary/Analog Inputs.

KNX Multifunction Actuators that can work as 8-channel Switching Actuator or 4-channel Blinds/Shutters Actuators.
Incorporate 12 Inputs: 8-Binary Inputs + 4-Binary/Analog Inputs.

KNX Multifunction Actuator that can work as: 16-channel Switching Actuator or 8-channel Blinds/Shutters Actuator.
Incorporate 23 Inputs: 16-Binary Inputs + 7-Binary/Analog Inputs.

1-channel Wireless KNX-RF S-Mode wireless Switching Actuator.
Normally open contact, not free of voltage, 16A relay.

KNX Switching Actuator which can work as:
· 2-channel Switching Actuator.
· 1-channel Blinds/Shutters Actuator.
It has 4 Analog/Digital inputs, which can be configured independently, through the ETS:

2-gang LaükaDot Capacitive Multifunction Pushbutton with Black glass and Copper colour frame.
Glass touch surface.
Lighted, but non-customizable, icons.

4-gang LaükaDot Capacitive Multifunction Pushbutton with Black glass and Copper colour frame.
Glass touch surface.
Lighted, but non-customizable, icons.

6-gang LaükaDot Capacitive Multifunction Pushbutton with Black glass and Copper colour frame.
Glass touch surface.
Lighted, but non-customizable, icons.

8-gang LaükaDot Capacitive Multifunction Pushbutton with Black glass and Copper colour frame.
Glass touch surface.
Lighted, but non-customizable, icons.

2-gang LaükaDot Capacitive Multifunction Pushbutton with White glass and Chrome colour frame.
Glass touch surface.
Lighted, but non-customizable, icons.

4-gang LaükaDot Capacitive Multifunction Pushbutton with White glass and Chrome colour frame.
Glass touch surface.
Lighted, but non-customizable, icons.

6-gang LaükaDot Capacitive Multifunction Pushbutton with White glass and Chrome colour frame.
Glass touch surface.
Lighted, but non-customizable, icons.

8-gang LaükaDot Capacitive Multifunction Pushbutton with White glass and Chrome colour frame.
Glass touch surface.
Lighted, but non-customizable, icons.

4-gang Laüka Capacitive Multifunction Pushbutton with Black glass and RGB backlit.
Customizable RGB backlit and lighted icons: Laüka Configurator
Glass touch surface.

4-gang Laüka Capacitive Multifunction Pushbutton with Black glass and Copper colour frame.
Lighted and customizable icons: Laüka Configurator
Glass touch surface.