Collection

KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
KNX Panel 10-fold with room temperature regulator, LCD display and 10 status LEDs – PI-, 2-point or sequence re

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

Enhance your xxter visualization with NFC tags for smart location-based actions and secure access in home or building. Seamless integration and ease.

Universal wall box for Largho panels L6/8/10/12, R6/8/10/12, R6/8/10/12 LCD

Mounting plate for wall box
Mounting accessory for installation in switch design 55 x 55 mm
Accessory for LS 20.00 pro4 / TS 10.00 knx / GS 10.00 knx
/ GS 20.00 knx / AS 10.00 knx

Flush-mounted wall box in galvanised steel. Suitable for Largho 2/4 and Contrattempo 2/4.
Measurements: 50x75x46 mm

PT 1000 Sensor standard
Dimensions 4mm x 30mm, cable length 1m

For fixing the presence detectors UP 258D12 and UP 258E22 and the brightness sensor UP 255D21 as a surface mounting device

PT 1000 Sensor standard
Afmetingen 6 mm x 50 mm, aansluitkabel 3 m

Mounting angle for outdoor installation
Accessory for LS 20.00 pro4 / TS 10.00 knx / GS 10.00 knx
/ GS 20.00 knx / AS 10.00 knx

Wall box made from galvanised steel. Fits Barchetto 2 and 4 as well as Trico 8RGB. Size ca. 32x112x55

Cable set Touch panel accessory VisuControl 10“/25,6cm

Cable set Touch panel accessory VisuControl 7 "/ 17.7 cm

Wall box made from galvanised steel. Fits Contrattempo 6.
Size ca. 50x116x41 mm

Wall box made from galvanised steel. Fits Barchetto 6.
Size ca. 34x176x55

For connection of a modular bus device to the bus line
10-pole BTI socket (BTI - Bus Transceiver Interface) for plugging of bus terminal devices with BTI connector

PT 1000 Sensor strap on installation
Dimensions 8mm x 40mm, cable length 3m

Diese Komponente gehört zum KNX-Modul Multi I/O 48 Kanäle Artikel 5267 und funktioniert nicht eigenständig!

UP 220/21
Pushbutton interface 2 x potential-free contact, output for LED control
2 inputs / outputs

PT 1000 Sensor ceiling installation
Cut out Diameter: 23mm, Depth: 28mm

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

Diese Komponente gehört zum KNX-Modul Multi I/O 48 Kanäle Artikel 5267 und funktioniert nicht eigenständig!

For disconnecting the bus line from the power supply. The device has a reset switch for isolating the bus voltage and resetting the bus devices connected to this line. Connection to ABB i-bus® via bus connection terminal.

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

RF-KNX compatible transmitter for general purpose which emulates the working mode of the channel code 0311h.
1 output channel.

KNX BAOS MODUL 838 KBERRY
Die Weinzierl KNX BAOS Module sind eine leistungsfähige und kostengünstige Lösung für KNX Konnektivität in Form einer kompakten Platine. Sie richten sich vor allem an Hersteller,

LCM-25KN Constant Current LED Driver 25W 24 V, 28 V, 36 V, 42 V, 50 V, 54 V with KNX

For operation with a KNX power supply without integrated choke or for connection to the unchoked output of the KNX N 125/x2 power supplies
Low-voltage terminal for unchoked voltage and bus
Modular installation devices for mounting on TH35 EN 60715 mount

The MDT Push Button Lite 55 Basic releases KNX telegrams depending on the paramerization after pressing the buttons.The push buttons can be programmed for 1 or 2 button operation. In addition to switching, dimming, blinds, scenes or sending values, a lot

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

Enhance your home automation with xxter iBeacons: location-based scenes, access, and presence detection without GPS.

The KNX TP Push Button 420 secure is a pushbutton insert with integrated bus coupler and mounting kit. The device is available with one or two rockers. Each rocker offers two pressure points (up/down). Artikel 5325 or 5375

PWM-60-24KN
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 2.5A; Dimming with KNX; IP67

PWM-60-12KN
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 5A; Dimming with KNX; IP67