Collection

ISE Smart Connect KNX E-Charge II

The ISE Smart Connect KNX E-Charge II is a powerful solution for charging electric vehicles. It offers five charging points per device, Dynamic Load Management (DLM), support of different manufacturers, network-supported control.

€419,16 Excl. tax
€507,18 Incl. tax
Available
KNX TP-RF Media Coupler TP-RF (868 MHz)

ZMCoup RF 868
KNX Media coupler for the interconnection of KNX TP lines with wireless KNX RF medium (868 MHz). Support for extended frames (APDU 254 bytes).
Frequency transmission will depend on the frequency used in the country where the project takes

€167,73 Excl. tax
€202,95 Incl. tax
Available
1280mA Bus Power Supply with +30Vdc diagnostic function 4SU MDRC

Compact power supply 1280 mA with integrated choke. Rapid diagnosis ETS communication objects. Operational status and bus line analysis possible by means ETS. Extra voltage output for feeding an extra line in combination with an extra choke.

€238,95 Excl. tax
€289,13 Incl. tax
Available
KNX Modbus Gateway 886

WEINZIERL 5256 KNX Modbus RTU Gateway
The KNX Modbus RTU Gateway 886 is a compact KNX/Modbus gateway with 250 freely configurable channels (KNX data points). The device allows easy integration of Modbus devices supporting the RTU protocol via RS-485 into

€230,81 Excl. tax
€279,28 Incl. tax
Available
KNX DMX-gateway 544

The KNX DMX Gateway 544 is a compact gateway between KNX and DMX512 with up to 64 freely configurable channels. DMX is a protocol for lighting control, especially in stage technology.

€198,80 Excl. tax
€240,55 Incl. tax
Available
KNX RF+ Socket with active power measurement 230VAC, 16A

The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.

€120,90 Excl. tax
€146,29 Incl. tax
Available
GVS WALTZ Tastsensor+ 4-fold

KNX Push Button Sensor, 4/6/8 buttons integrates the basic control functions of Switch, Dimming, RGB/RGBW lighting,

€159,88 Excl. tax
€193,45 Incl. tax
Available
Glastaster II Smart

Intuitive KNX control with color display and temperature sensor. Customizable functions for smart home automation.

€131,10 Excl. tax
€158,63 Incl. tax
Available
Analog IN-/Output 2 fold Flush mounted

Analog In-/Output 2-fold
Flush mounted, input voltage 0-12V/2-10V
or current loop 0-20mA/4-20mA
output voltage 0-10V

€95,94 Excl. tax
€116,09 Incl. tax
Available
KNX PWM-60-KN Constant Voltage LED Driver 60W 12V +KNX

PWM-60-12KN
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 5A; Dimming with KNX; IP67

€53,73 Excl. tax
€65,01 Incl. tax
Available
8-way switch actuator 10A per channel, 4 MDRC C-Load

8-way switch actuator 10A per channel, 4 MDRC

€166,25 Excl. tax
€201,16 Incl. tax
Available
IP Interface

KNX IP Interface: The IP Interface enables the communication between the PC and the KNX/EIB system via LAN.
The KNX IP Interface allows to programm the KNX bus via TCP/IP, 4 simultaneous connections possible.

€176,48 Excl. tax
€213,54 Incl. tax
Available
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »