Collection
MDT Energy Meter EZ: 3-phase power meter for both consumption and generation, includes 3 current transformers, suitable for industrial use, with RMS current measurement.
€281,57 Incl. tax
WEINZIERL 5256 KNX Modbus RTU Gateway
The KNX Modbus RTU Gateway 886 is a compact KNX/Modbus gateway with 250 freely configurable channels (KNX data points). The device allows easy integration of Modbus devices supporting the RTU protocol via RS-485 into
€279,28 Incl. tax
The KNX PowerSupply DGS 366 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke and additionally provides an output for auxiliary power.
€277,33 Incl. tax
KNX Panel 4-fold – 4 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 2 status LEDs – integrated bus coupler. Size: 50x75x35 mm
€277,09 Incl. tax
KNX Panel 4-fold – 4 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 2 status LEDs – integrated bus coupler. Size: 50x75x35 mm
€277,09 Incl. tax
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay, with mechanical manual operation for direct actuation of the relay contact.
€276,06 Incl. tax
The MDT KNX RF+ Wireless Line Coupler connects MDT KNX RF+ devices with the KNX bus. The line coupler has extensive filtering functions to minimize bus load on the wireless route.
€268,93 Incl. tax
For data exchange between two KNX bus lines with telegrams of up to 64 byte
For use as line coupler for connecting a line to the main line or as backbone coupler for connecting a main line to the backbone....
€268,67 Incl. tax
KNX Multifunction Actuators that can work as 8-channel Switching Actuator or 4-channel Blinds/Shutters Actuators.
Incorporate 12 Inputs: 8-Binary Inputs + 4-Binary/Analog Inputs.
€268,32 Incl. tax
Brightness measurement, temperature measurement, sun protection control, lighting control
For the detection and transmission of brightness and temperature
€265,12 Incl. tax
8-way switch actuator 16A per channel, 4 MDRC
€264,99 Incl. tax
KNX Panel Barchetto with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
KNX Panel 2-fold – 2 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louver
€260,15 Incl. tax
KNX Panel Barchetto with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
KNX Panel 2-fold – 2 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louver
€260,15 Incl. tax
The Central Operation Unit Smart combines a large number of functions in one device and serves as a central
control unit for your Smart Home. The integrated astronomical timer moves the blinds up in the morning automatically and down again after sunset.
€259,55 Incl. tax
The Central Operation Unit Smart 86 combines a large number of functions in one device and serves as a central
control unit for your Smart Home. The integrated astronomical timer moves the blinds up in the morning automatically and down again after sunse
€250,11 Incl. tax
KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f
€249,38 Incl. tax
KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f
€249,38 Incl. tax
This Interface connects two KNX lines to each other. Electrical isolation between the lines and reduction of the busload by using the filter function.
€248,45 Incl. tax
MDT CO2/VOC Combo Sensor 55: measures CO2, VOC, temperature, and humidity for air quality control in spaces. Fits standard switch programs.
€247,32 Incl. tax
DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715
€247,28 Incl. tax
The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al
€245,39 Incl. tax
3-channel Broadcast DALI Dimming Actuator.
Each channel can control up to 64 DALI Drivers (128 in total).
€241,40 Incl. tax
1-10V Dimming Actuator for Drivers or Ballasts, with fluorescent tubes or LED lighting.
3 output channels, with a maximum of 3A per channel.
It has 2 control elements for switching/dimming the load
€240,84 Incl. tax
The KNX DMX Gateway 544 is a compact gateway between KNX and DMX512 with up to 64 freely configurable channels. DMX is a protocol for lighting control, especially in stage technology.
€240,55 Incl. tax
KNX Power supply unit DC 29 V, 640 mA with additional unchoked output, N 125/22
€240,35 Incl. tax
Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)
€237,84 Incl. tax
The KNX IP BAOS 773 is used as Interface for connecting to KNX both on telegram level (KNXnet/IP Tunneling) and on data point level (KNX Application Layer). Clients can directly access Group Objects via either a Binary Protocol (over TCP/IP or UDP/IP) or
€236,74 Incl. tax
Dinuy FA KNT 001 KNX Power supply 640mA with auxiliary output
€235,80 Incl. tax
The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a
€235,22 Incl. tax
The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via button.
€235,16 Incl. tax
The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 11 independent electrical loads. Each output uses a bistable relay and can be operated manually via a
€232,80 Incl. tax
Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 µF fluorescent lamp load)
€231,55 Incl. tax
4-channel LED Strips Dimming Actuator.
Allows the control of 4 independent single-color, RGBW or RGB + W LED Strips.
Valid for LED Strips with constant voltage input 12V-24V.
PWM dimming technology.
€230,35 Incl. tax
KNX Panel 2-fold – 2 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 1 status LED – integrated bus coupler. Size: 50x75x35 mm
€228,69 Incl. tax
KNX Panel 2-fold – 2 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 1 status LED – integrated bus coupler. Size: 50x75x35 mm
€228,69 Incl. tax
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 6 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current. In dependence on the parameterization the me
€227,30 Incl. tax