Collection

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

Interface with 4 independent channels, which can work as Binary or Analog Input.
The Digital (Binary) inputs which may be conmnected to a conventional push-button, switch or binary sensor with free-voltage contact.

PWM-120-12KN
KNX AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 12Vdc at 10A; Dimming with KNX; IP67

PWM-120-24KN
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 5A; Dimming with KNX; IP67

AC-DC KNX EIB DIN rail power supply with integrated choke; Output 30Vdc at 640mA; basic function

Zennio Quad PLUS KNX: versatile sensor with 4 inputs for push buttons, temperature, and motion. Controls heating/cooling and offers various functionalities.

3 floating relay contact
One relay contact per output as switching element
Contact rated current according to DIN EN 60669-1: 6 A (resistive load)

KNX-RF Easy Mode
Wireless Dimmer for LED lamps.
Leading or Trailing edge dimming technology
Power capacity of up to 250W, depending on the type of lamp.

KNX-RF Easy Mode
Wireless 1-channel Dimmer for 12V-48V single-color LED Strips.
Pulse Width Modulation (PWM) dimming technology.
Up to 8A dimming capacity (12V: 96W // 24V: 192W).

EM KNT 003 Interface with 8 binary/analog inputs long-distance Binary Inputs 200 meter

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

Passive infrared detector for ceiling mounting indoors
Adjustable sensitivity of detection
Mixed light measurement

The MDT Room Temperature Controller is used to control the indoor temperature, it has a working range from -10 to +50°C. The MDT Room Temperature Controller detects the temperature and releases telegrams in dependence on its parameterisation.

Room Temp

KNX-RF Easy Mode
Dimmer for 3-channels RGB 12-48V LED strips.
PWM dimming technology.
Control by RF remote control: RC KNX 001.

The KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked.

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

GlobalVizion.com - KNX Basic Course ETS5 NL Voucher: Access to 1 course, fast delivery after payment (within 1 business day), learn KNX fundamentals, professional guidance, flexible learning. Become a KNX expert!

The KNX IO 410 (4I) is a compact binary input with 4 channels to control lights, shutter etc. The inputs can be connected to conventional switches with an external voltage of 12 to 230 V. Using as impulse counter is possible as well. T

PWM-200KN Constant Voltage LED Driver 200W 24V, KNX secure

PWM-200KN Constant Voltage LED Driver 200W 12V, KNX secure

The MDT Switch Actuator for flush mounting receives KNX / EIB telegrams and switches 1 or 2 independent electrical loads. Each output uses a bistable relay.
Available as 1-way and 2-way actuator