Collection

KNX Panel Barchetto with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
KNX Panel 2-fold – 2 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louver

The Central Operation Unit Smart combines a large number of functions in one device and serves as a central
control unit for your Smart Home. The integrated astronomical timer moves the blinds up in the morning automatically and down again after sunset.

The Central Operation Unit Smart 86 combines a large number of functions in one device and serves as a central
control unit for your Smart Home. The integrated astronomical timer moves the blinds up in the morning automatically and down again after sunse

KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.

Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f

KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.

Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f

This Interface connects two KNX lines to each other. Electrical isolation between the lines and reduction of the busload by using the filter function.

MDT CO2/VOC Combo Sensor 55: measures CO2, VOC, temperature, and humidity for air quality control in spaces. Fits standard switch programs.

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

3-channel Broadcast DALI Dimming Actuator.
Each channel can control up to 64 DALI Drivers (128 in total).

1-10V Dimming Actuator for Drivers or Ballasts, with fluorescent tubes or LED lighting.
3 output channels, with a maximum of 3A per channel.
It has 2 control elements for switching/dimming the load

The KNX DMX Gateway 544 is a compact gateway between KNX and DMX512 with up to 64 freely configurable channels. DMX is a protocol for lighting control, especially in stage technology.

KNX Power supply unit DC 29 V, 640 mA with additional unchoked output, N 125/22

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

The KNX IP BAOS 773 is used as Interface for connecting to KNX both on telegram level (KNXnet/IP Tunneling) and on data point level (KNX Application Layer). Clients can directly access Group Objects via either a Binary Protocol (over TCP/IP or UDP/IP) or

Dinuy FA KNT 001 KNX Power supply 640mA with auxiliary output

The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a

The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via button.

The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 11 independent electrical loads. Each output uses a bistable relay and can be operated manually via a

Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 µF fluorescent lamp load)

4-channel LED Strips Dimming Actuator.
Allows the control of 4 independent single-color, RGBW or RGB + W LED Strips.
Valid for LED Strips with constant voltage input 12V-24V.
PWM dimming technology.

KNX Panel 2-fold – 2 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 1 status LED – integrated bus coupler. Size: 50x75x35 mm

KNX Panel 2-fold – 2 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louvers, value setting, scene recall and programming (8Bit), 1 status LED – integrated bus coupler. Size: 50x75x35 mm

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 6 independent electrical loads.

The MDT Switch Actuator offers current measurement for each channel and measurement of the total current. In dependence on the parameterization the me