Collection

The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.

Wireless KNX-RF Motion Detectors, with Infrared detection technology, for recessed mounting in a false ceiling, powered by battery.
It has a highly sensitive PIR sensor, which, together with the lens design,

KNX Switching Actuator which can work as:
· 2-channel Switching Actuator.
· 1-channel Blinds/Shutters Actuator.
It has 4 Analog/Digital inputs, which can be configured independently, through the ETS:

KNX Multifunction Actuators that can work as 8-channel Switching Actuator or 4-channel Blinds/Shutters Actuators.
Incorporate 12 Inputs: 8-Binary Inputs + 4-Binary/Analog Inputs.

Interface with 4 independent channels, which can work as Binary or Analog Input.
The Digital (Binary) inputs which may be conmnected to a conventional push-button, switch or binary sensor with free-voltage contact.

KNX Push Button Sensor, 4/6/8 buttons integrates the basic control functions of Switch, Dimming, RGB/RGBW lighting,

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

Ultrasound for reliable detection for ceiling installation indoors even behind objects
Additional detection options through PIR technology
Horizontal 360° motion detection area

Enhance your xxter visualization with NFC tags for smart location-based actions and secure access in home or building. Seamless integration and ease.

2 channels
Electrically interlocked relays to reverse the direction of rotation
Integrated electronics for detection of the actuation of an electromechanical limit switch and with auto-calibration of the travel time from one limit switch to the other

The KNX PowerSupply 365 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has an integrated bus choke and additionally provides an output for auxiliary power.

The KNX IO 534 CV (4D) is a compact RGB / RGBW / Tunable White dimming actuator with 4 PWM outputs. The dimming actuator can be used e.g. for LED panels or stripes with RGB / RGBW / Tunable White configuration or as 4 independent PWM dimmer channels.

Weinzierl KNX ENO 626 Secure
The KNX ENO 626 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus. With this device, commands and measured values from EnOcean wireless sensors can be transmitted to the KNX bus,

MDT Energy Meter EZ: 3-phase power meter for both consumption and generation, includes 3 current transformers, suitable for industrial use, with RMS current measurement.

AC-DC KNX EIB DIN rail power supply with integrated choke; Output 30Vdc at 1.280mA; basic function

The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a

KNX Panel Barchetto with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.
KNX Panel 6-fold – 6 buttons with selectable functions: light on/off/toggle/dimming, shutters/ louver

KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.

KNX Panel 6-fold with room temperature regulator and LCD display – PI-, 2-point or sequence regulator, 6 butt

The KNX IP BAOS 773 is used as Interface for connecting to KNX both on telegram level (KNXnet/IP Tunneling) and on data point level (KNX Application Layer). Clients can directly access Group Objects via either a Binary Protocol (over TCP/IP or UDP/IP) or

The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads.
Each output uses a monostable relay.

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The Central Operation Unit Smart combines a large number of functions in one device and serves as a central
control unit for your Smart Home. The integrated astronomical timer moves the blinds up in the morning automatically and down again after sunset.

The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator