Collection

Wireless door/window contact sensor for detecting open/closed status. Battery-powered (life >12 years). KNX-RF S-Mode, configurable via ETS5.

Mini presence detector for ceiling installation with 360° detection angle, 8 m range. For KNX systems with features like constant light control, alarm, and scenes.

Compact KNX power supply 1280 mA with diagnostic function and integrated choke. ETS enables status and bus line analysis. Includes extra 30 V DC output, overload and short-circuit protection.

The Weinzierl KNX IP BAOS 777 provides visualization, control, email notifications, and time synchronization for KNX installations. Includes web server and easy configuration via ETS software.

Motion detector and automatic switch, available in standard and with temperature sensor and sensor buttons. Fits 55 mm systems from GIRA, Berker, Jung, and Merten.

Gateway for KNX integration with Fujitsu, General, Hiyasu, and Fuji Electric AC units. Bidirectional communication via CN65 connector, 2 analog/digital inputs, and KNX Secure support. Compact design for installation in junction or wall boxes.

Gateway for KNX-Daikin Altherma units. Bidirectional control, 2 inputs for sensors, 10 logic functions, data saving on power failure.

Der 16 A Aktor der AKU-Serie eignet sich für Schalten, Jalousiesteuerung und Heizung. Bietet autom. Beschattung, PWM-Reg. und Lüftungsfunktion. Erhältlich in 4-, 6-, 8-, 16- und 24-fach, mit 100 µF Kapazitätslast.

Combi presence detector with sensors for temperature, humidity, CO2, and VOC. Features 360° detection, RGB LED for air quality display, and constant light control for up to 3 light groups.

16-channel switch/blind actuator with 23 inputs (16 binary + 7 binary/analog). Handles high loads (16A). Configurable via ETS5.

The LCM-25KN is a 25W constant current LED driver with selectable current levels via DIP switch, KNX interface, and flicker-free design. Supports emergency lighting and constant light output.

ISE Smart Connect KNX E-Charge II offers dynamic load management for 5 charging points per device, supporting multiple manufacturers, KNX security, and ETS configuration. Ideal for smart charging integration.

The MDT KNX RF+ Shutter Actuator controls a shutter or blind with 230 V. Easily programmable via ETS5, with 8 scenes, automatic functions, sun protection, and positioning.

MDT KNX diagnostic power supply with one 640mA output for bus voltage incl. choke and a separate 30V DC output. Includes diagnostics for bus faults and overload. Width: 4TE.

Heating actuator for 24-230VAC. Controls up to 4 electrothermal valve drives per channel. Integrated PI controller for heating and cooling. Supports 1 Bit, 1 Byte, and direct temperature control via KNX.

2-fach-Touch-Schalter mit Hintergrundbeleuchtung und Thermostat. Ideal für moderne Installationen. In verschiedenen Farben und individuell verfügbar.

The KNX RF+ Push-button Plus 8-fold offers advanced control of lights, shutters, and devices. The buttons are programmable with an integrated actuator and LED indicator. Ideal for wireless solutions.

Presence detector with 3 sensors and temperature sensor, designed for hollow ceiling installation. Detects motion up to 11 m Ø, presence up to 5 m Ø. Features 3 light channels, HVAC, alarm channels, and LED night light.

The DALI Control 64 Gateway interfaces between KNX and DALI for switching, dimming, and color control of DALI lights. Supports DALI DT6/DT8, RGB, Tunable White, and more with two DALI outputs.

Multifunction actuator with 2 outputs and 4 analog-digital inputs. Offers manual control, 4 thermostats, 10 logic functions, and advanced lighting control for flexible automation.

Smart blind and shutter control with 4 outputs at 6A for precise light regulation, weather protection, and auto sunshade. DIN-rail, manual operation.

Wireless KNX-RF S-Mode dimmer for RGB LED strips. 3 channels for RGB or single-colored LED strips with PWM control. Configurable via ETS5, with analog and digital inputs.

KNX-DALI gateway with 2 outputs, DALI-2 certified, supports up to 20 DALI devices per output. Includes color temperature control, dimming, and diagnostics.

The MDT Room Temperature/Humidity Sensor 63 detects temperature and humidity indoors, with automatic dew point calculation. Comfort zone adjustable via Min/Max values.