Collection

The AKS-1616.03 from the AKS series offers 16 channels in a compact design. Supports 16A and 140 µF C-Load, with extended logic and scene functions. Ideal for medium to large load applications.

Ultrasonic level sensor for oil and water up to 5 m. Contactless measurement via sound waves. 10 m cable, extendable to 40 m.

Roller shutter and blind actuator with 8 channels and KNX Secure. Offers 20 logical functions, manual operation, and output timing. Suitable for DIN rail mounting and provides protection against bus failure.

Micro presence detector with temperature and brightness sensor, designed for suspended ceilings. Features intelligent auto/manual mode switching. KNX Secure for enhanced security. Available from Q4 2025.

KNX line coupler for reliable data exchange between bus lines. Supports 64-byte telegrams, has filter table, diagnostic LEDs, and galvanic isolation between lines. For DIN rail mounting.

Compact KNX presence detector with 360° detection up to 50 m², Ø8 m diagonal, mounting height 3–5 m. Opal-matte. Manual control and advanced KNX features. IP55, Ø33 mm.

Heating actuator with integrated PI controller for 6 electrothermic valve drives. Supports 24-230VAC, emergency operation on telegram failure, KNX-compatible.

KNX Secure switch actuator with 8 independent channels, 16A C-Load per channel. Suitable for lighting, climate control, and shading. Compact DIN rail design.

The MDT Glass Push Button Plus 4-fold offers flexible control for lighting, blinds, and more. Available with or without temperature sensor, with bicolored LEDs, orientation light, and logical modules for versatile use.

The 32-fold binary input allows easy connection of switches and contacts to a KNX system. Supports advanced functions like scene control, group control, and more. Suitable for DIN rail mounting.

Flush-mounted JAL shutter actuator, 1-channel, controls 230VAC motors up to 300W, for KNX systems. Supports manual operation, ventilation function, and automatic sun shading. Easy installation with common L-connection.

LED controller for 12/24V LEDs, 4 channels, 2/4A per channel, dimming function, RGBW, Tunable White, automatic color optimization, time settings.

KNX 4-fold pushbutton interface with 4 configurable inputs/outputs for potential-free contacts or LED control. Includes bus coupling unit, 8-wire cable, PL-Link and S-Mode support.

The KNX Presence Detector Standard detects presence via PIR sensor and controls lighting based on brightness. Includes 3 digital inputs for KNX functions and logical control.

MDT mounting frames Type A, B, and D are designed for various devices like switches, temperature controllers, and motion detectors. They provide solid and secure installation for the corresponding components.

The DALI Control PRO64 Gateway controls up to 64 ECGs and supports DALI/DALI-2 standards. It supports HSV, RGBW, tunable white and can be easily operated via KNX and a web interface.

KNX gateway for connecting up to 3 M-Bus devices. Supports 32 data points. Wall-mounted. IP54/65. Powered via KNX bus.

The KNX RF+ line coupler connects KNX RF+ devices to the KNX bus, reducing load. From ETS6, it can function as a segment coupler. Compact and flush-mounted.

Line Coupler with Data Secure offers electrical isolation, supports extended group addresses, and KNX Data Secure. Easy installation on DIN rails, designed to reduce bus load.

The MDT KNX power supply of 160mA provides 30VDC system voltage with protection against short-circuit, overload, and overheating. Features integrated choke and LED indicators. Ideal for DIN rail installation.

Multifunction device with KNX power supply, KNX-IP interface, 6 inputs, and 5 outputs. Suitable for 2-pipe fan coil units and a 16A C-Load relay.

Fan-coil controller for 2/4-pipe units, featuring 2x16A outputs and 6 multifunction inputs. Supports KNX Secure, manual control, and logic functions.

Multifunction actuator for flush mounting with 2 configurable outputs (16 A C-Load). Supports shutter control, logic functions, manual operation, and data saving.

Interface for bidirectional communication between Ethernet and KNX TP, supports KNX Secure, 5 connections, max. APDU 254 bytes, DIN-rail mounting.