Collection

The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.

The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads (AKK-04FC.03 4 loads).
Each output uses a monostable relay and is individually agjustable via ETS. In operation mode as fan coil actuator a 3-step (A

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay, with mechanical manual operation for direct actuation of the relay contact.

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

KNX-RF Easy Mode
Wireless Dimmer for LED lamps.
Leading or Trailing edge dimming technology
Power capacity of up to 250W, depending on the type of lamp.

Wireless door/window contact sensor KNX-RF S-Mode for detecting the state (closed/open) of a door or window over the reed contact integrated in the device.
Battery-operated: 2 batteries x 3V CR2032. Useful life highr than 12 years.

1-channel Wireless KNX-RF S-Mode wireless Switching Actuator.
Normally open contact, not free of voltage, 16A relay.

4-channel Universal Dimming Actuator for:
· Incandescence and 230V Halogen lamps.
· LV Halogen lamp with electronic transformer.
· Dimmable 230V LED lamps.
· Dimmable 12V - LED lamps (electronic transformer).
Leading or Trailing edge dimming technolo

Universal Dimming Actuator for:
Incandescence and 230V Halogen lamps.
Leading or Trailing edge dimming technology.
1 channel with a maximum load capacity of 1.000W.

Electromotive, proportional (constant) valve actuator with LED valve position indication and with integrated bus coupling unit for direct connection to KNX:
For latching to valve adapter

BACnet Application Specific Controller (B-ASC) as Gateway between KNX TP and BACnet IP
Up to 250 BACnet objects
Up to 455 BACnet COV subscriptions

Two outputs for switching and dimming resistive, inductive or capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V

Four outputs for switching and dimming of resistive, inductive and capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V

Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 µF fluorescent lamp load)

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

Rated contact current according to DIN EN 60669: 6 AX (70 µF fluorescent lamp load), 10 A (resistive load)

One relay contact as switching element
Bus-powered electronics
Integrated bus coupling unit, Bus connection via bus terminal block
Type of protection: IP 20
Rated contact voltage AC 230 V
Rated contact frequency: 50/60 Hz
Rated contact current 16 AX

Smart 86 Switch: 6-button control with color display and temperature sensor. Versatile for smart home functions.

Compact KNX RF/TP Coupler 673.1 secure for integrating KNX RF devices, supports long frames & KNX Data Security.

Artikel 5238 IP Aktor and Interface
The KNX TP Multi IO 580 (48I/O) is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output.

The KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked.

Diese Komponente gehört zum KNX-Modul Multi I/O 48 Kanäle Artikel 5267 und funktioniert nicht eigenständig!