Collection

The KNX IP Interface 732 secure serves as a secure interface between a LAN (IP, Ethernet) and KNX and can be used as a programming interface for the ETS®. As a KNX Secure Interface (tunneling), the device prevents unauthorized access to the system.

KSI-01U
USB interface; galvanic isolated bidirectional access to the KNX bus line; support up to 220 byte APDU

The KNX IP BAOS 774 is used as Interface for connecting to KNX both on telegram level (KNXnet/IP Tunneling) and on data point level (KNX Application Layer).

ISE SMART APP KNX AXIS
The world's first KNX connection (plug-in) for networking products from the Axis Communications company.
Combine the world of building automation (KNX) with the security technology of the Axis Communications company. Utilise the s

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current.
The measured data can be transmit in differe

Analog In-/Output 4-fold

2SU MDRC mounted, input voltage 0-12V/2-10V
or current loop 0-20mA/4-20mA
output voltage 0-10V

8-gang LaükaDot Capacitive Multifunction Pushbutton with Black glass and Copper colour frame.
Glass touch surface.
Lighted, but non-customizable, icons.

Wireless KNX-RF Motion Detectors, with Infrared detection technology, for recessed mounting in a false ceiling, powered by battery.
It has a highly sensitive PIR sensor, which, together with the lens design,

1-10V Dimming Actuator for Drivers or Ballasts, with fluorescent tubes or LED lighting.
3 output channels, with a maximum of 3A per channel.
It has 2 control elements for switching/dimming the load

Per input one AC or DC contact in the range of 10...230 V
Per input direct operation function on the device for simulation of input status and indication oft the input status via LED

Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 µF fluorescent lamp load)

The service interface consists of:
OCI702 service interface
USB 2.0 cable (Type A / B)
KNX service cable for Synco™ controllers (RJ45 / RJ45)
KNX service cable for Desigo™ TRA (RJ45 / jack plug 2.5 mm)
KNX service cable (RJ45 / KNX bus terminal)

IP Router Secure N 146/03 5WG1146-1AB03

Artikel 5238 IP Aktor and Interface
The KNX TP Multi IO 580 (48I/O) is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output.

Advanced leakage sensor with bus coupler, electrolytic measurement, alarm function, optical signaling, adjustable delay, and IP66 protection. Size: Ø70x24mm.

Rain Sensor

The MDT Glass Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.

The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a

4-gang LaükaDot Capacitive Multifunction Pushbutton with Black glass and Copper colour frame.
Glass touch surface.
Lighted, but non-customizable, icons.