Collection

KNX multifunction actuator with KNX Secure, 4 configurable outputs (16 A C-load), 5 analog/digital inputs, logic functions, thermostats, and shutter control.

The KNX RF Multi/TP media coupler extends the range of KNX systems and seamlessly connects KNX devices. Supports both KNX RF Ready and KNX RF Multi and can function as a repeater for larger installations.

Redundant KNX Bus Power Supply with dual power for enhanced reliability. 30VDC, 640mA, integrated choke, short-circuit and overload protection, diagnostic functions.

KNX DIN rail actuator with 4 triac outputs for electrothermal valves and 4 freely configurable inputs. Supports on/off, PWM and 3-point control, with integrated thermostat modules and logic functions.

IoT gateway that brings Matter devices to KNX. Control Hue, Ikea, Nuki, Nanoleaf, Aqara, Shelly and more via ETS group addresses. KNX IP interface with tunneling, local automations, and secure remote access.

KNX multifunction actuator with KNX Secure, 4 configurable outputs (16 A C-load), ideal for shutter control, fan coil management, logic, and more.

The MDT 640mA KNX/EIB Power Supply with integrated choke provides stabilized 30VDC system voltage for KNX/EIB components. Short-circuit-proof, with overload protection and temperature monitoring.

KNX actuator with 12 configurable outputs (16 A), usable individually as switch actuators. Suitable for shutter control, fan regulation, and KNX Secure.

4-gang capacitive KNX touch sensor with RGB icon lighting, integrated thermostat, temperature sensor, proximity sensor, 2 inputs and full KNX Secure support. Fits 55×55 mm frames.

Gateway zur KNX-Steuerung von Daikin-Klimaanlagen. Mit 2 analogen/digitalen Eingängen, bidirektionaler Kommunikation, 10 logischen Funktionen und Datenspeicherung bei KNX-Busausfall. Kompaktes Design für Einbau.

Mini presence detector for ceiling mounting, 1 pyro sensor, 360° detection, up to 4 m range, light sensor, bus coupling, suitable for KNX systems.

The Weinzierl KNX DMX Gateway 544 connects KNX and DMX512, a protocol for lighting control in stage technology, with 64 configurable channels. Supports master and slave mode.

NTC temperature probe for accurate measurement in KNX installations with a measuring range of −50 °C to +60 °C. Suitable for temperature monitoring and thermostat functions. Supplied exclusively as a set of 4 units (TS01B04ACC).

Elegant 10.1" KNX touch panel with aluminum face and LED strip for full automation. Control lighting, heating, climate, and more. Supports intercom and cameras for enhanced security (GVS).

16-channel switch/blind actuator with 23 inputs (16 binary + 7 binary/analog). Handles high loads (16A). Configurable via ETS5.

The KNX RF+ line coupler connects KNX RF+ devices to the KNX bus, reducing load. From ETS6, it can function as a segment coupler. Compact and flush-mounted.

Switching actuator/I/O with 16 relay outputs 16A/16AX for C-loads and 16 potential-free inputs. Suitable for lighting, HVAC, blinds and fan coils. Supports NTC sensors, logic interlock and up to 2 thermostat modules.

Twilight switch with external light sensor. 10 channels, 4 threshold, 6 logic channels, manual control, display lighting and PIN security.

The DALI Control PRO64 Gateway controls up to 64 ECGs and supports DALI/DALI-2 standards. It supports HSV, RGBW, tunable white and can be easily operated via KNX and a web interface.

KNX PWM-60-KN, 60W, 12V Constant Voltage LED-Treiber mit PWM-Dimmtechnologie für LED-Streifen. Kompatibel mit KNX-Systemen. Universelle Eingang (90-305V) und IP67-Gehäuse für Innen- und Außenanwendungen.

Versatile 8-fold multifunction actuator for switching, blinds, heating/cooling, and fan control, rated for 10A. Channel-specific configuration with KNX-Secure support.

KNX-Deckenpräsenzmelder mit PIR, Licht-, Temperatur-, Feuchte- und CO₂-Sensor. Für konstante Lichtregelung, Klima- und Luftqualitätssteuerung. Auf- oder Unterputzmontage, KNX Secure.

Compact gateway between KNX TP and Modbus RTU. Operates as master or slave, with up to 250 configurable channels, KNX Secure, bus-powered, direct ETS testing.

Gateway for bidirectional control of LG air conditioners via KNX, with 3 analog/digital inputs for sensors or switches and 10 logical functions.