MDT

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

The MDT Shutter Actuator with monostable relays is individually programmable by the ETS. Switching, alarm, central and blocking functions are available as well as extensive calibration and positioning functions. In addition to the function as a shutter ac

The MDT Switch Actuator for flush mounting receives KNX / EIB telegrams and switches 1 or 2 independent electrical loads. Each output uses a bistable relay.
Available as 1-way and 2-way actuator

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

The MDT Universal Actuator with monostable relays can be used as Switch Actuator 2-fold or Shutter Actuator 1-fold and is individually programmable by the ETS. Switching, alarm, central and lock functions are available as well as extensive calibration and

The MDT Room Temperature/humidity sensor 55 detects temperature and humidity in indoor rooms, the dew point is calculated automatically. For the sensors the Min./Max values can be set in the paramerization of the device and approbiate actions can be defin

The MDT Room Temperature/humidity sensor 55 detects temperature and humidity in indoor rooms, the dew point is calculated automatically. For the sensors the Min./Max values can be set in the paramerization of the device and approbiate actions can be defin

Flush-mounted box made of metal for wall installation
For touch panel VisuControl 10 “/ 25.6cm
Dimensions (W x H x D): 275mm x 189mm x 76mm

The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (Only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

The MDT Motion Detector/Automatic Switch with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. It is possible to configure 2 separate light channels, one HVA channel and one channel for room monitorin

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The Brightness Sensor/Controller with constant level light intensity is suited for ceiling installation in 35mm Kaiser installation box.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

The MDT Switch Actuator for flush mounting receives KNX / EIB telegrams and switches 1 or 2 independent electrical loads. Each output uses a bistable relay.
Available as 1-way and 2-way actuator

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The MDT Room Temperature Controller is used to control the indoor temperature, it has a working range from -10 to +50°C. The MDT Room Temperature Controller detects the temperature and releases telegrams in dependence on its parameterisation.

Room Temp

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.