Collection

For operation with a KNX power supply without integrated choke or for connection to the unchoked output of the KNX N 125/x2 power supplies
Low-voltage terminal for unchoked voltage and bus
Modular installation devices for mounting on TH35 EN 60715 mount

2 channels
Electrically interlocked relays to reverse the direction of rotation
Integrated electronics for detection of the actuation of an electromechanical limit switch and with auto-calibration of the travel time from one limit switch to the other

3 floating relay contact
One relay contact per output as switching element
Contact rated current according to DIN EN 60669-1: 6 A (resistive load)

Rated contact frequency: 50/60 Hz
2 floating relay contacts
Contact rated current according to DIN EN 60669-1: 10 A (resistive load)

4 Inputs for AC/DC 12...230 V
Max. cable length, unshielded, twisted 100 m
Bus-powered electronics

- 1 channel
- Modular installation device for mounting in AP 118 automation module box or AP 641 room control box

For mounting in AP 118 automation module box or AP 641 room control box

8 slots for a sensor/actuator module, type RS or RL
Internal bus cable for connection of the sensor/actuator module to the bus

One relay contact as switching element
Bus-powered electronics
Integrated bus coupling unit, Bus connection via bus terminal block
Type of protection: IP 20
Rated contact voltage AC 230 V
Rated contact frequency: 50/60 Hz
Rated contact current 16 AX

One relay contact per output
Rated contact operating voltage: AC 230 V
Rated contact frequency: 50/60 Hz
Rated contact current: 16 A

For data exchange between two KNX bus lines with telegrams of up to 64 byte
For use as line coupler for connecting a line to the main line or as backbone coupler for connecting a main line to the backbone....

The service interface consists of:
OCI702 service interface
USB 2.0 cable (Type A / B)
KNX service cable for Synco™ controllers (RJ45 / RJ45)
KNX service cable for Desigo™ TRA (RJ45 / jack plug 2.5 mm)
KNX service cable (RJ45 / KNX bus terminal)

Compatible with USB 2.0 and USB 3.0
For isolated access to the bus line over the built-in USB socket (type B)
For connection of a PC for addressing,etc
Support of bus telegrams with up to 64 bytes length

IP Router Secure N 146/03 5WG1146-1AB03

KNX Power supply unit DC 29 V, 640 mA with additional unchoked output, N 125/22

KNX Power supply unit DC 29 V, 320 mA with additional unchoked output, N 125/12

KNX Power supply unit DC 29 V, 160 mA with additional unchoked output, N 125/02

Touch control TC5 UP 205/22 black or white
Aluminium and glas housing
Capacitive touch colour display 5", 480 x 854 pixels
LED colour light strip as orientation light, respectively to signal alarms
Integrated room temperature sensor

MDT DALI Control PRO64 Gateway: Advanced KNX & DALI-2 support for 64 ECGs/16 groups, HSV/RGB/RGBW color control, web interface for easy commissioning.

Smart 86 Switch without temperature sensor: 6-button control, color display. Ideal for smart home functions.

Smart 86 Switch: 6-button control with color display and temperature sensor. Versatile for smart home functions.

MDT CO2/VOC Combo Sensor 55: measures CO2, VOC, temperature, and humidity for air quality control in spaces. Fits standard switch programs.

Compact KNX RF/TP Coupler 673.1 secure for integrating KNX RF devices, supports long frames & KNX Data Security.

GlobalVizion.com - KNX Basic Course ETS5 NL Voucher: Access to 1 course, fast delivery after payment (within 1 business day), learn KNX fundamentals, professional guidance, flexible learning. Become a KNX expert!