MDT

The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator

The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX

The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.

KNX IP Interface: The IP Interface enables the communication between the PC and the KNX/EIB system via LAN.
The KNX IP Interface allows to programm the KNX bus via TCP/IP, 4 simultaneous connections possible.

The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current.
The measured data can be transmit in differe

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay, with mechanical manual operation for direct actuation of the relay contact.

The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.

The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.

The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via button.

The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator

The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.

The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.

The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (Only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

Efficient MDT Energy Meter EZ for industry: measures energy consumption and production, suitable for 1- or 3-phase circuits, with integrated current measurement and true RMS.

The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a

The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a

The MDT Dimming Actuator receives KNX/EIB telegrams and dimms/switches up to 4 independent electrical loads. Each output can be operated manually via a push button.

Smart 86 Switch: 6-button control with color display and temperature sensor. Versatile for smart home functions.

The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX

The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX

The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.

The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a