Collection
- 1 channel
- Modular installation device for mounting in AP 118 automation module box or AP 641 room control box
€77,75 Incl. tax
One relay contact per output
Rated contact operating voltage: AC 230 V
Rated contact frequency: 50/60 Hz
Rated contact current: 16 A
€105,20 Incl. tax
One relay contact as switching element
Bus-powered electronics
Integrated bus coupling unit, Bus connection via bus terminal block
Type of protection: IP 20
Rated contact voltage AC 230 V
Rated contact frequency: 50/60 Hz
Rated contact current 16 AX
€68,61 Incl. tax
Rated contact frequency: 50/60 Hz
2 floating relay contacts
Contact rated current according to DIN EN 60669-1: 10 A (resistive load)
€79,71 Incl. tax
UP 220/21
Pushbutton interface 2 x potential-free contact, output for LED control
2 inputs / outputs
€40,90 Incl. tax
2 channels
Electrically interlocked relays to reverse the direction of rotation
Integrated electronics for detection of the actuation of an electromechanical limit switch and with auto-calibration of the travel time from one limit switch to the other
€113,04 Incl. tax
3 floating relay contact
One relay contact per output as switching element
Contact rated current according to DIN EN 60669-1: 6 A (resistive load)
€90,82 Incl. tax
Rated contact current according to DIN EN 60669: 6 AX (70 µF fluorescent lamp load), 10 A (resistive load)
€151,64 Incl. tax
4 Inputs for AC/DC 12...230 V
Max. cable length, unshielded, twisted 100 m
Bus-powered electronics
€118,27 Incl. tax
With 4 inputs / outputs each configurable for potential-free contacts or for control of an LED (max 2 mA)
With integrated bus coupling unit, bus connection via bus terminal
8-wire plug-in cable set, 280 mm long, extendable to a max. of 10 m
€71,73 Incl. tax
8 inputs AC/DC 12...230 V
8 relay contact outputs
Rated contact voltage AC 230 V
€366,19 Incl. tax
Brightness measurement, temperature measurement, sun protection control, lighting control
For the detection and transmission of brightness and temperature
€265,12 Incl. tax
For fixing the presence detectors UP 258D12 and UP 258E22 and the brightness sensor UP 255D21 as a surface mounting device
€17,05 Incl. tax
Electromotive, proportional (constant) valve actuator with LED valve position indication and with integrated bus coupling unit for direct connection to KNX:
For latching to valve adapter
€174,60 Incl. tax
IP Router Secure N 146/03 5WG1146-1AB03
€380,67 Incl. tax
For operation with a KNX power supply without integrated choke or for connection to the unchoked output of the KNX N 125/x2 power supplies
Low-voltage terminal for unchoked voltage and bus
Modular installation devices for mounting on TH35 EN 60715 mount
€59,71 Incl. tax
Two DALI outputs with DALI-2 certification acc. to IEC 62386-101 and 103, each for communication with up to 64 DALI ballasts
€454,77 Incl. tax
BACnet Application Specific Controller (B-ASC) as Gateway between KNX TP and BACnet IP
Up to 250 BACnet objects
Up to 455 BACnet COV subscriptions
€601,39 Incl. tax
Per input one AC or DC contact in the range of 10...230 V
Per input direct operation function on the device for simulation of input status and indication oft the input status via LED
€138,42 Incl. tax
8 Inputs for AC/DC 12...230 V,
8 Inputs for floating contacts
€290,69 Incl. tax
• 2 DALI outputs with DALI-2 certification
• Control capacity for up to 20 DALI-ECGs per DALI output
• DALI output voltage of 19 V, short circuit resistant
€186,87 Incl. tax
Two outputs for switching and dimming resistive, inductive or capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V
€206,38 Incl. tax
Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 µF fluorescent lamp load)
€231,55 Incl. tax
Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 μF fluorescent lamp load)
€345,43 Incl. tax
DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715
€487,00 Incl. tax
DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715
€247,28 Incl. tax
DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715
€426,60 Incl. tax
Four outputs for switching and dimming of resistive, inductive and capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V
€423,45 Incl. tax
Rated contact current 10 AX
€171,14 Incl. tax
For mounting in AP 118 automation module box or AP 641 room control box
€69,91 Incl. tax
QMX3.P37-1BSC
Room operator unit KNX with temperature sensor, segmented backlit display, configurable touchkeys, LED display, black
€299,66 Incl. tax
Touch control TC5 UP 205/22 black or white
Aluminium and glas housing
Capacitive touch colour display 5", 480 x 854 pixels
LED colour light strip as orientation light, respectively to signal alarms
Integrated room temperature sensor
€441,42 Incl. tax
8 slots for a sensor/actuator module, type RS or RL
Internal bus cable for connection of the sensor/actuator module to the bus
€133,39 Incl. tax
For data exchange between two KNX bus lines with telegrams of up to 64 byte
For use as line coupler for connecting a line to the main line or as backbone coupler for connecting a main line to the backbone....
€268,67 Incl. tax
KNX Power supply unit DC 29 V, 160 mA with additional unchoked output, N 125/02
€125,21 Incl. tax
KNX Power supply unit DC 29 V, 320 mA with additional unchoked output, N 125/12
€174,29 Incl. tax