Collection

Electromotive, proportional (constant) valve actuator with LED valve position indication and with integrated bus coupling unit for direct connection to KNX:
For latching to valve adapter

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

8 Inputs for AC/DC 12...230 V,
8 Inputs for floating contacts

Per input one AC or DC contact in the range of 10...230 V
Per input direct operation function on the device for simulation of input status and indication oft the input status via LED

BACnet Application Specific Controller (B-ASC) as Gateway between KNX TP and BACnet IP
Up to 250 BACnet objects
Up to 455 BACnet COV subscriptions

• 2 DALI outputs with DALI-2 certification
• Control capacity for up to 20 DALI-ECGs per DALI output
• DALI output voltage of 19 V, short circuit resistant

Two outputs for switching and dimming resistive, inductive or capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V

Four outputs for switching and dimming of resistive, inductive and capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V

Rated contact current 10 AX

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 µF fluorescent lamp load)

Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 μF fluorescent lamp load)

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

Brightness measurement, temperature measurement, sun protection control, lighting control
For the detection and transmission of brightness and temperature

For fixing the presence detectors UP 258D12 and UP 258E22 and the brightness sensor UP 255D21 as a surface mounting device

Passive infrared detector for ceiling mounting indoors
Adjustable sensitivity of detection
Mixed light measurement

Ultrasound for reliable detection for ceiling installation indoors even behind objects
Additional detection options through PIR technology
Horizontal 360° motion detection area

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

UP 287/13
Pushbutton, 4 fold with status LED, titanium white, DELTA style
Pushbutton in pair
Vertical operation
Per pushbutton selectable function
LED for orientation light
Connectable bus coupling unit (BTM) or flush-mounted actuators via BTM

UP 286/13
Pushbutton, 2 fold with status LED, titanium white, DELTA style
Pushbutton in pair
Vertical operation
Per pushbutton selectable function
LED for orientation light
Connectable bus coupling unit (BTM) or flush-mounted actuators via BTM

UP 285/13
Pushbutton, single, with status LED, titanium white, DELTA style
Pushbutton in pair
Vertical operation
Per pushbutton selectable function
LED for orientation light
Connectable bus coupling unit (BTM) or flush-mounted actuators via BTM

For connection of a modular bus device to the bus line
10-pole BTI socket (BTI - Bus Transceiver Interface) for plugging of bus terminal devices with BTI connector

With 4 inputs / outputs each configurable for potential-free contacts or for control of an LED (max 2 mA)
With integrated bus coupling unit, bus connection via bus terminal
8-wire plug-in cable set, 280 mm long, extendable to a max. of 10 m

UP 220/21
Pushbutton interface 2 x potential-free contact, output for LED control
2 inputs / outputs

QMX3.P37-1BSC
Room operator unit KNX with temperature sensor, segmented backlit display, configurable touchkeys, LED display, black

Two DALI outputs with DALI-2 certification acc. to IEC 62386-101 and 103, each for communication with up to 64 DALI ballasts

8 inputs AC/DC 12...230 V
8 relay contact outputs
Rated contact voltage AC 230 V

Rated contact current according to DIN EN 60669: 6 AX (70 µF fluorescent lamp load), 10 A (resistive load)

For operation with a KNX power supply without integrated choke or for connection to the unchoked output of the KNX N 125/x2 power supplies
Low-voltage terminal for unchoked voltage and bus
Modular installation devices for mounting on TH35 EN 60715 mount

2 channels
Electrically interlocked relays to reverse the direction of rotation
Integrated electronics for detection of the actuation of an electromechanical limit switch and with auto-calibration of the travel time from one limit switch to the other

3 floating relay contact
One relay contact per output as switching element
Contact rated current according to DIN EN 60669-1: 6 A (resistive load)

Rated contact frequency: 50/60 Hz
2 floating relay contacts
Contact rated current according to DIN EN 60669-1: 10 A (resistive load)

4 Inputs for AC/DC 12...230 V
Max. cable length, unshielded, twisted 100 m
Bus-powered electronics

- 1 channel
- Modular installation device for mounting in AP 118 automation module box or AP 641 room control box