Collection

Compact VisuControl Easy II object server for KNX systems: visualizes and controls up to 200 functions. Supports RGB, IP cameras, VPN, and email alerts. No external power supply needed.

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current.
The measured data can be transmit in differe

The MDT Logic Module is used for fast and easy compilation of Logic functions to control building automation systems. All the functions are parametrized directly in the ETS without additionally software tools. There are 24 independent function blocks with

Two DALI outputs with DALI-2 certification acc. to IEC 62386-101 and 103, each for communication with up to 64 DALI ballasts

MDT CO2/VOC Combo Sensor 55: measures CO2, VOC, temperature, and humidity for air quality control in spaces. Fits standard switch programs.

The KNX USB Interface 312 is a data interface between a PC or laptop and the KNX installation bus. It can be used as a programming interface for ETS® Software Version 3 (or higher) and supports KNX long frames.

The KNX IP Router 752 secure enables the secure forwarding (routing) of telegrams between different lines over a LAN (IP, Ethernet) as a fast backbone. As a secure router, the device enables the connection of unsecured communications on a KNX TP line with

KNX BAOS MODUL 838 KBERRY
Die Weinzierl KNX BAOS Module sind eine leistungsfähige und kostengünstige Lösung für KNX Konnektivität in Form einer kompakten Platine. Sie richten sich vor allem an Hersteller,

The measuring system SK08-BFT-WMT records the soil moisture and the soil temperature, which is measured with the Watermark® sensor. The measured values can be output and used for control tasks.

LCM-40KN Constant Current LED Driver 40W 40 V, 45 V, 57 V, 67 V, 80 V, 100 V

The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a

KDA-64 KNX-Dali-gateway

Weinzierl KNX ENO 626 Secure
The KNX ENO 626 secure device serves as a bidirectional gateway between EnOcean wireless devices and the KNX bus. With this device, commands and measured values from EnOcean wireless sensors can be transmitted to the KNX bus,

PWM-60-24KN
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 2.5A; Dimming with KNX; IP67

The MDT Motion Detector/Automatic Switch with light sensor captures the smallest movements with its built in pyro detectors and high resolution lens. It is possible to configure 2 separate light channels, one HVA channel and one channel for room monitorin

The MDT Glass Push Button II Smart releases KNX telegrams after touching the sensor areas on top, 1 or 2 Button operation can be adjusted. The device provides extensive functions like switching of lighting, operation of blinds and shutters, contact type a

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.

KNX Multifunction Actuator that can work as: 16-channel Switching Actuator or 8-channel Blinds/Shutters Actuator.
Incorporate 23 Inputs: 16-Binary Inputs + 7-Binary/Analog Inputs.

Zennio Quad PLUS KNX: versatile sensor with 4 inputs for push buttons, temperature, and motion. Controls heating/cooling and offers various functionalities.

KNX Power supply unit DC 29 V, 640 mA with additional unchoked output, N 125/22

PWM-200KN Constant Voltage LED Driver 200W 24V, KNX secure

Rain Sensor

The MDT Temperature Controller is used for all purpose temperature control applications. The temperature is received as an KNX object or directly from the connected PT1000 temperature sensors (Only SCN-RT6AP.01, SCN-RT2UP.01 or SCN-RT4UP.01).

The KNX IP Interface 740.1 wireless serves as a wireless interface to the KNX bus based on WLAN. The device can be used as a programming interface for the ETS® and is a wireless alternative to USB or wired IP interfaces. The bus access via WIFI allows the

The MDT Universal Actuator with monostable relays can be used as Switch Actuator 2-fold or Shutter Actuator 1-fold and is individually programmable by the ETS. Switching, alarm, central and lock functions are available as well as extensive calibration and

KNX-GW2-DMX
The KNX-DMX Gateway is an Interface between the KNX bus and the DMX512 bus.

The KNX IP BAOS 774 is used as Interface for connecting to KNX both on telegram level (KNXnet/IP Tunneling) and on data point level (KNX Application Layer).

The MDT KNX RF+ Socket receives KNX/EIB telegrams and switches one electrical load.

The MDT KNX Push Button Plus releases KNX telegrams after pushing the buttons on top.

Analog In-/Output 4-fold

2SU MDRC mounted, input voltage 0-12V/2-10V
or current loop 0-20mA/4-20mA
output voltage 0-10V

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

Universal dimmer for RLC/LED, max 250W. Suitable for flush-mounting, KNX-RF support, includes scenes and timer function.

For connection of a modular bus device to the bus line
10-pole BTI socket (BTI - Bus Transceiver Interface) for plugging of bus terminal devices with BTI connector

One relay contact per output
Rated contact operating voltage: AC 230 V
Rated contact frequency: 50/60 Hz
Rated contact current: 16 A

The KNX RF / ENO Push Button 440 secure unites two wireless protocols in one device: EnOcean and KNX RF. Out of the box the push button operates in EnOcean mode.