Collection

PWM-200KN Constant Voltage LED Driver 200W 12V, KNX secure

KNX bus coupling for counters with M-Bus interface

Wall box made from galvanised steel. Fits Barchetto 2 and 4 as well as Trico 8RGB. Size ca. 32x112x55

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

The MDT Room Temperature/humidity sensor 55 detects temperature and humidity in indoor rooms, the dew point is calculated automatically. For the sensors the Min./Max values can be set in the paramerization of the device and approbiate actions can be defin

The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a

The new MDT security module prevents all connection-oriented accesses of the ETS, such as the programming and also the unloading of the bus devices, in the KNX line. This significantly increases the safety of the protected line in the inner and in the out

KNX IP Router: This Interface offers the same functions as the IP interface, but the device routes telegrams as a line coupler using the the LAN.

Interface with 4 independent channels, which can work as Binary or Analog Input.
The Digital (Binary) inputs which may be conmnected to a conventional push-button, switch or binary sensor with free-voltage contact.

Per input one AC or DC contact in the range of 10...230 V
Per input direct operation function on the device for simulation of input status and indication oft the input status via LED

UP 220/21
Pushbutton interface 2 x potential-free contact, output for LED control
2 inputs / outputs

8 inputs AC/DC 12...230 V
8 relay contact outputs
Rated contact voltage AC 230 V

For mounting in AP 118 automation module box or AP 641 room control box

For data exchange between two KNX bus lines with telegrams of up to 64 byte
For use as line coupler for connecting a line to the main line or as backbone coupler for connecting a main line to the backbone....

The service interface consists of:
OCI702 service interface
USB 2.0 cable (Type A / B)
KNX service cable for Synco™ controllers (RJ45 / RJ45)
KNX service cable for Desigo™ TRA (RJ45 / jack plug 2.5 mm)
KNX service cable (RJ45 / KNX bus terminal)

Compact KNX RF/TP Coupler 673.1 secure for integrating KNX RF devices, supports long frames & KNX Data Security.

Artikel 5238 IP Aktor and Interface
The KNX TP Multi IO 580 (48I/O) is a universal binary interface for building control. It provides 48 I/O lines. Each line can be used as binary input as well as binary output.

OFFERS SPECIAL PRODUCT FEATURES SUCH AS
Presence and daylight-dependent constant light control
KNX functions: alarm, twilight switch, brightness detection, light-dependent motion detection, snooze function, scene telegram via object

MDT Energy Meter EZ: 3-phase power meter for both consumption and generation, includes 3 current transformers, suitable for industrial use, with RMS current measurement.

KNX TP Line Coupler

LCM-60KN Constant Current LED Driver 60W 42 V, 57 V, 67 V, 86 V, 90 V

KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.

KNX Panel 6-fold with room temperature regulator and LCD display – PI-, 2-point or sequence regulator, 6 butt

KNX Panel with integrated bus coupler. Suitable for wall and furniture installation. With standard KNX-functions. Optionally with status LEDs.

Specifically for installation cut-outs with a material thickness of 2-4 mm, Largho design panels are simply f

The MDT KNX RF+ Switch Actuator receives KNX/EIB telegrams ans switchs up to 2 indipendent electrical loads.
Each output uses a monostable relay.

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The MDT Push Button Smart 55 releases KNX telegrams depending on the paramerization after pressing the buttons. The RGBW status LEDs can be controlled with internal or external objects. The LED brightness is controllable via day/night or brightness object

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX

The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads (AKK-04FC.03 4 loads).
Each output uses a monostable relay and is individually agjustable via ETS. In operation mode as fan coil actuator a 3-step (A

The KNX RF/TP Coupler is a compact KNX radio coupler.
It connects KNX RF devices of a radio line with the KNX Bus Twisted Pair.
The device has a filter table (8k byte). The coupler supports long frames

Wireless Dimmer for 1-10V Ballast or LED Driver, for example, Fluorescence or LED lighting fixtures.
Can control up to a maximum of 100 equipments.Junction-box mounting.

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

8 Inputs for AC/DC 12...230 V,
8 Inputs for floating contacts