Collection

The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator

LCM-25KN Constant Current LED Driver 25W 24 V, 28 V, 36 V, 42 V, 50 V, 54 V with KNX

KNX IP Router: This Interface offers the same functions as the IP interface, but the device routes telegrams as a line coupler using the the LAN.

The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via button.

The MDT Universal Actuator receives KNX/EIB telegrams can be used as Switch Actuator or Shutter Actuator. Mixed applications from Switch- and Shutter Actuators are possible. Each output uses a bistable relay and can be operated manually via button.

The Universal Interface detects status changes at the inputes and triggers KNX telegrams depending on his parameterizations.

Weather Station Home Outdoor installation on wall or pole, integrated BCU

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.

The KNX IO 546.1 secure (1D1O) is a compact combined dimming/switching actuator with 1 dimming output for active electronic ballasts with a 0/1-10V interface and 1 bi-stable relay output.

The KNX IP Interface 732 secure serves as a secure interface between a LAN (IP, Ethernet) and KNX and can be used as a programming interface for the ETS®. As a KNX Secure Interface (tunneling), the device prevents unauthorized access to the system.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT KNX RF+ Wireless Line Coupler connects MDT KNX RF+ devices with the KNX bus. The line coupler has extensive filtering functions to minimize bus load on the wireless route.

The new AKS series offers more channels at less space, so lower costs per channel.
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 20 independent electrical loads. Each output uses a bistable relay and can be operated manually via a

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads.
The MDT Switch Actuator offers current measurement for each channel and measurement of the total current.
The measured data can be transmit in differe

Passive infrared detector for ceiling mounting indoors
Adjustable sensitivity of detection
Mixed light measurement

- Buzzer for building automation KNX
- Up to 3 input objects can be configured
- Adjustable volume level (soft, medium, loud)
- Adjustable sequence
- Clearly structured ETS
- Easy handling and mounting
- Various mounting capabilities
- Compact hous

The KNX PowerSupply USB 367 is a 640 mA bus power supply with high efficiency and a small footprint of only 4 units (72 mm). The device has a bus choke, an integrated USB Interface (Micro USB connector)

The KNX IO 530 (1D2I) is a compact mains dimmer for 230 V ~ with one output and two binary inputs.

KSI-01U
USB interface; galvanic isolated bidirectional access to the KNX bus line; support up to 220 byte APDU

PWM-120-24KN
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 5A; Dimming with KNX; IP67

AC-DC KNX EIB DIN rail power supply with integrated choke; Output 30Vdc at 1.280mA; basic function

KNX bus coupling for counters with M-Bus interface

The MDT KNX RF+ Glas Push Button Plus releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

The MDT KNX Push Button releases KNX telegrams after pushing the buttons on top.

The Central Operation Unit Smart combines a large number of functions in one device and serves as a central
control unit for your Smart Home. The integrated astronomical timer moves the blinds up in the morning automatically and down again after sunset.

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.

The MDT KNX/EIB Power Supply with integrated choke produces the stabilized KNX system voltage (30VDC) to supply the connected KNX/EIB components. The operating status is indicated via 3 LED.

The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (eg door and window contacts) to the device

The new MDT security module prevents all connection-oriented accesses of the ETS, such as the programming and also the unloading of the bus devices, in the KNX line. This significantly increases the safety of the protected line in the inner and in the out

Wireless KNX RF S-Mode Temperature and Relative Humidity Sensor.
The communication with the bus must be done by using a KNX/KNX RF S-Mode media coupler.

KNX-RF wireless temperature, luminosity & humidity multi-sensor

Enhance your home automation with xxter iBeacons: location-based scenes, access, and presence detection without GPS.

2 channels
Electrically interlocked relays to reverse the direction of rotation
Integrated electronics for detection of the actuation of an electromechanical limit switch and with auto-calibration of the travel time from one limit switch to the other

The measuring system SK08-BFT-WMT records the soil moisture and the soil temperature, which is measured with the Watermark® sensor. The measured values can be output and used for control tasks.