Current Transformer – 120 A

Name: Zennio Current Transformer – 120 A
Brand: Zennio
Price: 23.76 EUR
Availability: OutOfStock
Rating: 0 (0 reviews)

0 Review(s)

€23,76 Excl. tax €30,47 Excl. tax
€28,75 Incl. tax €36,86 Incl. tax. Out of stock, but available

Unit price: €23,76 / Piece

Accessory for KES Plus, designed for accurate current measurements up to 120 A. Compact design (46x30.8x29.5mm) with CE compliance. Cable diameter Ø16mm. Read more

Specifications

Brand:

Zennio

Article number:

ZN1AC-CST120

EAN:

8411080796769

Availability:

Out of stock, but available

Delivery time:

Dispatched within approximately 8 working days (please note: this is an estimate and depends on availability from the manufacturer; in some cases, it may be dispatched sooner, but it can also take longer).

Information

Datasheet

Zennio Current Transformer – 120 A (Ref.: ZN1AC-CST120)

The Zennio current transformer is an essential accessory for the KES Plus energy meter. Designed for accurate current measurements up to 120 A, it provides instantaneous data on energy consumption and power management.

Features:

Current measurement range: 0.01 to 120 A.
Current ratio: 120A/40mA.
Dimensions: 46 x 30.8 x 29.5 mm.
Maximum cable diameter: Ø16 mm.
Operating temperature: -25°C to +60°C.
Storage temperature: -30°C to +90°C.
Accuracy: 1% (at RL ≤ 10Ω).
Linearity: ≤0.2% (at RL ≤ 10Ω).
Phase error at rated current: 2°.
Dielectric strength: 3.5KV.
Secondary side cable section: 0.33mm² (22 AWG).
Secondary side cable length: 50 cm (not modifiable).
Weight: 70 g.
Transformer ratio: Np:Ns=1:3000.

Installation Instructions:

Open the transformer clamp and place the phase cable inside, paying attention to the orientation.
Close the clamp around the cable and lock it using the side clip.
Correctly connect the secondary cables to the KES Plus, observing polarity, before closing the clamp.

Safety Instructions:

Installation must be performed by qualified professionals according to applicable laws and regulations.
Do not connect mains voltage or any external voltage to the signal cables.
Keep the device away from water and do not cover it during use.

Compliance: This device complies with CE directives.