Collection

The KNX Secure CO KNT LC1 KNX Line Coupler is a KNX line coupler with a compact design. It connects two KNX segments (e.g. a KNX line with a KNX area).

EM KNT 003 Interface with 8 binary/analog inputs long-distance Binary Inputs 200 meter

KNX Push Button Sensor, 4/6/8 buttons integrates the basic control functions of Switch, Dimming, RGB/RGBW lighting,

KNX Push Button Sensor, 4/6/8 buttons integrates the basic control functions of Switch, Dimming, RGB/RGBW lighting,

KNX Push Button Sensor, 4/6/8 buttons integrates the basic control functions of Switch, Dimming, RGB/RGBW lighting,

The GVS multifunctional pushbutton sensors from the ADVANCE+ series set completely new standards in terms of functionality and flexibility.

The GVS multifunctional pushbutton sensors from the ADVANCE+ series set completely new standards in terms of functionality and flexibility.

The GVS multifunctional pushbutton sensors from the ADVANCE+ series set completely new standards in terms of functionality and flexibility.

The GVS multifunctional pushbutton sensors from the ADVANCE+ series set completely new standards in terms of functionality and flexibility.

Electromotive, proportional (constant) valve actuator with LED valve position indication and with integrated bus coupling unit for direct connection to KNX:
For latching to valve adapter

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

8 Inputs for AC/DC 12...230 V,
8 Inputs for floating contacts

Per input one AC or DC contact in the range of 10...230 V
Per input direct operation function on the device for simulation of input status and indication oft the input status via LED

BACnet Application Specific Controller (B-ASC) as Gateway between KNX TP and BACnet IP
Up to 250 BACnet objects
Up to 455 BACnet COV subscriptions

• 2 DALI outputs with DALI-2 certification
• Control capacity for up to 20 DALI-ECGs per DALI output
• DALI output voltage of 19 V, short circuit resistant

Two outputs for switching and dimming resistive, inductive or capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V

Four outputs for switching and dimming of resistive, inductive and capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V

Universal dimmer for RLC/LED, max 250W. Suitable for flush-mounting, KNX-RF support, includes scenes and timer function.

Rated contact current 10 AX

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715

Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 µF fluorescent lamp load)

Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 μF fluorescent lamp load)

DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715