Collection

3-channel KNX-RF S-Mode Wireless Dimming Actuator for RGB LED Strips.
Control of RGB or Single-colored LED Strips via Pulse Width Modulation (PWM).

It has 4 Analog/Digital inputs, which can be configured independently, through the ETS:

1-channel KNX-RF S-Mode Wireless Dimming Actuator for LED lamps.
. Dimmable 230V LED lamps.
Dimmable 12V LED lamps with electronic transformer.
Incandescent or 230V halogen lamps.

The KNX RF/TP Coupler is a compact KNX radio coupler.
It connects KNX RF devices of a radio line with the KNX Bus Twisted Pair.
The device has a filter table (8k byte). The coupler supports long frames

Wireless Dimmer for 1-10V Ballast or LED Driver, for example, Fluorescence or LED lighting fixtures.
Can control up to a maximum of 100 equipments.Junction-box mounting.

1-channel Wireless KNX-RF S-Mode wireless Switching Actuator.
Normally open contact, not free of voltage, 16A relay.

Wireless KNX-RF Motion Detectors, with Infrared detection technology, for recessed mounting in a false ceiling, powered by battery.
It has a highly sensitive PIR sensor, which, together with the lens design,

This interface allows establishing a bidirectional connection between a PC or a laptop and the KNX RF wireless network.
Máx.Longframe APDU: 205

4-channel LED Strips Dimming Actuator.
Allows the control of 4 independent single-color, RGBW or RGB + W LED Strips.
Valid for LED Strips with constant voltage input 12V-24V.
PWM dimming technology.

1-channel Universal Dimming Actuator, in small housing.
Phase control dimming technology (leading- or trailing-edge), being valid for different types of load RLC+LED:
· 230V~ Dimmable LED lamps.
· 12V~ Dimmable LED lamps with electronic transformer.

3-channel Broadcast DALI Dimming Actuator.
Each channel can control up to 64 DALI Drivers (128 in total).

1-10V Dimming Actuator for Drivers or Ballasts, with fluorescent tubes or LED lighting.
3 output channels, with a maximum of 3A per channel.
It has 2 control elements for switching/dimming the load

Multifunction actuator that can function as a regulator for RGBW LED strips with 4 input and output channels:
· Switching of 4 independent output channels
· Blinds/Awnings Actuator with 2 output channels
· 1 Fan-Coil Actuator with 2 tubes

Dimming Actuator with 8 output channels, designed for the control of resistive, inductive, capacitive and LED loads.
· 230V dimmable LED Lamps.
· 12V dimmable LED Lamps with Electronic transformer. o Incandescent and 230V Halogens.

4-channel Universal Dimming Actuator for:
· Incandescence and 230V Halogen lamps.
· LV Halogen lamp with electronic transformer.
· Dimmable 230V LED lamps.
· Dimmable 12V - LED lamps (electronic transformer).
Leading or Trailing edge dimming technolo

Universal Dimming Actuator for:
Incandescence and 230V Halogen lamps.
Leading or Trailing edge dimming technology.
1 channel with a maximum load capacity of 1.000W.

KNX Switching Actuator which can work as:
· 2-channel Switching Actuator.
· 1-channel Blinds/Shutters Actuator.
It has 4 Analog/Digital inputs, which can be configured independently, through the ETS:

KNX Multifunction Actuator that can work as: 16-channel Switching Actuator or 8-channel Blinds/Shutters Actuator.
Incorporate 23 Inputs: 16-Binary Inputs + 7-Binary/Analog Inputs.

KNX Multifunction Actuators that can work as 8-channel Switching Actuator or 4-channel Blinds/Shutters Actuators.
Incorporate 12 Inputs: 8-Binary Inputs + 4-Binary/Analog Inputs.

4-channel Multi-function Switching Actuator or 2-channel Blinds/Shutters Actuator.
Incorporates 12 Inputs: 8-Binary Inputs + 4-Binary/Analog Inputs.

2-channel Switching Actuator or 1-channel Blinds / Awnings Actuator.
Maximum switching capacity of up to 16A per channel, 2 voltage-free contacts.

Dinuy FA KNT 001 KNX Power supply 640mA with auxiliary output

Interface with 4 independent channels, which can work as Binary or Analog Input.
The Digital (Binary) inputs which may be conmnected to a conventional push-button, switch or binary sensor with free-voltage contact.

Interface with 4 independent channels, which can work as Binary Input or LED Output.
Equipped with 4 Digital (Binary) inputs which may be conmnected to a conventional push-button, switch or binary sensor with free-voltage

The KNX IP Secure Router enables the forwarding of telegrams between different lines via a LAN (IP) network as a fast backbone. Furthermore, this device is suitable for connecting a PC to the KNX network, e.g. for ETS programming.