Collection

KNX-RF Easy Mode
Wireless Dimmer for LED lamps.
Leading or Trailing edge dimming technology
Power capacity of up to 250W, depending on the type of lamp.

KNX-RF Easy Mode
Dimmer for 3-channels RGB 12-48V LED strips.
PWM dimming technology.
Control by RF remote control: RC KNX 001.

1-channel KNX RF S-Mode Wireless Dimming Actuator for DALI Drivers or Ballasts, with LED or Fluorescence lighting.
Broadcast and uni-directional DALI communication.
Up to 64 DALI ECGs can be controlled.

3-channel KNX-RF S-Mode Wireless Dimming Actuator for RGB LED Strips.
Control of RGB or Single-colored LED Strips via Pulse Width Modulation (PWM).

It has 4 Analog/Digital inputs, which can be configured independently, through the ETS:

1-channel Universal Dimming Actuator, in small housing.
Phase control dimming technology (leading- or trailing-edge), being valid for different types of load RLC+LED:
· 230V~ Dimmable LED lamps.
· 12V~ Dimmable LED lamps with electronic transformer.

4-channel LED Strips Dimming Actuator.
Allows the control of 4 independent single-color, RGBW or RGB + W LED Strips.
Valid for LED Strips with constant voltage input 12V-24V.
PWM dimming technology.

KNX-RF Easy Mode
Wireless 1-channel Dimmer for 12V-48V single-color LED Strips.
Pulse Width Modulation (PWM) dimming technology.
Up to 8A dimming capacity (12V: 96W // 24V: 192W).

Wireless KNX RF S-Mode Temperature and Relative Humidity Sensor.
The communication with the bus must be done by using a KNX/KNX RF S-Mode media coupler.

Wireless door/window contact sensor KNX-RF S-Mode for detecting the state (closed/open) of a door or window over the reed contact integrated in the device.
Battery-operated: 2 batteries x 3V CR2032. Useful life highr than 12 years.

KNX-RF wireless temperature, luminosity & humidity multi-sensor

Interface with 4 independent channels, which can work as Binary Input or LED Output.
Equipped with 4 Digital (Binary) inputs which may be conmnected to a conventional push-button, switch or binary sensor with free-voltage

Interface with 4 independent channels, which can work as Binary or Analog Input.
The Digital (Binary) inputs which may be conmnected to a conventional push-button, switch or binary sensor with free-voltage contact.

EM KNT 003 Interface with 8 binary/analog inputs long-distance Binary Inputs 200 meter

Efficient MDT Energy Meter EZ for industry: measures energy consumption and production, suitable for 1- or 3-phase circuits, with integrated current measurement and true RMS.

MDT Energy Meter EZ: 3-phase power meter for both consumption and generation, includes 3 current transformers, suitable for industrial use, with RMS current measurement.

Flush-mounted wall box in galvanised steel. Suitable for Largho 2/4 and Contrattempo 2/4.
Measurements: 50x75x46 mm

For single-phase and three-phase counters
Import and export of active power
Current and voltage per phase
Active energy (2 tariffs)

The Gira X1 was developed specifically for Smart Homes with a KNX network. It enables you to connect a variety of devices and monitor automated processes via app. Minimum effort for maximum comfort.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT VisuControl Touch Panel is used for the visualisation of the current building status and to control building functions.

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

The MDT Presence Detector is available in several versions, Presence Detector with light sensor and Presence Detector with light sensor plus constant level light intensity. The Presence Detectors captures the smallest movements with 1-4 pyro sensors and h

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext

Depending on its parameterization the MDT Glass Push Button II Lite releases KNX telegrams. The sensor areas can be programmed for 1 or 2 button operation (BE-GTL4xx.01: 4 single sensor buttons). The RGBW status LEDs can be controlled with internal or ext