SMG 2 S KNX | 2-ch 1–10 V control unit, base module MIX
€181,35 Excl. tax
€315,38 Excl. tax
€219,43 Incl. tax €381,61 Incl. tax. Out of stock, but available
€219,43 Incl. tax €381,61 Incl. tax. Out of stock, but available
2-channel 1–10 V control unit for dimming/switching EVG and LED gear. MIX base module, expandable to 6 channels. Manual control and status LEDs. Read more
Specifications
Brand:
Theben
Article number:
4910273
EAN:
4003468491737
Availability:
Out of stock, but available
Delivery time:
Dispatched within approximately 8 working days (please note: this is an estimate and depends on availability from the manufacturer; in some cases, it may be dispatched sooner, but it can also take longer).
Due to the holidays, orders may be delayed and pickup is not possible.
Information
SMG 2 S KNX – 2-channel 1–10 V control unit, MIX base module
Article number: 4910273
Application
The Theben SMG 2 S KNX is a 2-channel control unit for 1–10 V dimming, designed specifically for use in KNX installations. As part of the modular MIX system, this device functions as a base module and can be expanded with up to two extension modules for a total of 6 channels. The unit is suitable for switching and dimming lighting in combination with electronic ballasts (EVG) and LED drivers. Each channel features a 1–10 V output and a potential-free switching output (relay contact).
Functions
- MIX base module for KNX installations
- 2 channels with 1–10 V control and switching relay each
- Suitable for EVG and LED ballasts
- Expandable up to 6 channels with MIX extension modules
- Manual control per channel (ON/OFF/BUS)
- LED status indicator for each channel
- Combinable with other MIX modules (switching, blinds, heating, binary inputs)
- Zero-cross switching to protect the relay
Technical data
- KNX bus voltage: ≤ 10 mA
- Operating voltage: 230 V AC, 50 Hz
- Standby power: 1.6 W
- Max. power loss: 2.4 W
- Width: 4 modules (TE)
- Mounting: DIN rail
- Connections: Screw terminals | KNX bus terminal
- Cable cross-section (solid): 0.5 mm² (Ø 0.8) to 6 mm²
- Cable cross-section (with ferrule): 0.5 mm² to 4 mm²
- Number of channels: 2
- Contact type: Normally open, 16 A, 10 A
- Contact gap: < 3 mm
- Switching output: Potential-free
- Output voltage: 230 V AC
- Output frequency: 50 Hz
- Inrush current: 400 A (150 µs), 200 A (600 µs)
- Resistive load: 3680 W
- Incandescent/halogen load: 2500 W
- Capacitive load: 140 µF
- Input voltage: 1–10 V
- Max. input signal current: 100 mA
- Signal duration: Continuous
- Max. cable length: 500 m
- Ambient temperature: -5 °C to +45 °C
- Protection rating: IP 20
- Protection class: II according to EN 60 730-1
Important note: This module is a base module of the MIX system. Up to two MIX extension modules can be connected to expand to 6 channels.
Related products
SME 2 S KNX | 2-ch 1–10 V control, MIX extension module
2-channel 1–10 V control unit for switching and dimming lights. MIX extension module, expandable up to 6 channels. Use only with a MIX base module.
€128,50 Excl. tax
€155,49 Incl. tax
€155,49 Incl. tax
Orderable
