KNX dimmer 4 channels 1–10 V | 4× relays 16 A
€180,00 Excl. tax
€320,00 Excl. tax
€217,80 Incl. tax €387,20 Incl. tax. Out of stock, but available
€217,80 Incl. tax €387,20 Incl. tax. Out of stock, but available
4-channel KNX dimmer with 1–10 V outputs and 4 relays for electronic ballasts. Supports single channel, tunable white, RGB and RGBW, with scenes, logic and energy-saving functions. Read more
Specifications
Brand:
eelectron
Article number:
DM04E01KNX
EAN:
8054144524986
Availability:
Out of stock, but available
Delivery time:
Dispatched within approximately 8 working days (please note: this is an estimate and depends on availability from the manufacturer; in some cases, it may be dispatched sooner, but it can also take longer).
Information
Link to eelectron website (English)
KNX dimmer 4 channels 1–10 V | 4× relays 16 A
Art. No.: DM04E01KNX
This 4-channel KNX dimmer is designed for controlling electronic ballasts and LED drivers via a 1–10 V control signal. The device operates without an additional power supply and combines analog dimming outputs with high-power relay outputs in a compact DIN-rail solution for professional lighting installations.
Applications
- Dimming luminaires with 1–10 V interface
- Control of electronic ballasts
- Tunable white lighting
- RGB and RGBW lighting
- Switching the supply voltage for ballasts and LED drivers
Functions
- 4 independent 1–10 V dimming channels
- 4 relay outputs rated at 16 A for power switching
- Flexible assignment of relays to 1–10 V channels (e.g. RGBW)
- Support for single channel, tunable white, RGB and RGBW
- No inrush currents thanks to capacitive load control
- Start-up function for fluorescent lamps
- Configurable behavior at power-up and during dimming
- Timed functions such as switch-on delay and staircase lighting
- Scenes, sequences, blocking and logic functions
- Energy-saving mode (Economical Mode)
- Customizable dimming curve with up to 5 points
- 4 manual control buttons with status LEDs
- 16 logic blocks
- Support for KNX Data Secure
Technical data
- KNX bus power supply: 21–32 V DC (SELV)
- KNX current consumption: max. 15 mA
- Power loss: max. 4 W
- Analog outputs: 1–10 V
- Max. control current per output: 100 mA
- Max. cable length 1–10 V: 500 m (0.5 mm²)
- Relay contacts: µ-contact
- Max. relay current: 16 A, 250 V AC, cos φ = 1
- Max. relay inrush current: 117 A (TV-8)
- Incandescent lamps: max. 8 A
- Motors and geared motors: max. 3 A
- Mounting: DIN rail, 4 modules
- Degree of protection: IP20
- Operating temperature: -5 °C to +45 °C
Important notes
- Always ensure that the inrush current of LED drivers is lower than the permitted relay peak current.
- Relay outputs are intended for power switching and not for direct dimming.
- Use suitable cabling for long 1–10 V connections to avoid voltage drop.
- Installation and parameterization must be carried out by a qualified KNX installer.
