Collection

The MDT Push Button Smart 55 releases KNX telegrams depending on the paramerization after pressing the buttons. The RGBW status LEDs can be controlled with internal or external objects. The LED brightness is controllable via day/night or brightness object

The MDT Push Button Smart 55 releases KNX telegrams depending on the paramerization after pressing the buttons. The RGBW status LEDs can be controlled with internal or external objects. The LED brightness is controllable via day/night or brightness object

The MDT Glass Push Button releases KNX telegrams after touching the sensor areas on top, 1 or 2 button operation can be parameterized.

PT 1000 Sensor standard
Dimensions 4mm x 30mm, cable length 1m

The MDT Room Temperature/humidity sensor 55 detects temperature and humidity in indoor rooms, the dew point is calculated automatically. For the sensors the Min./Max values can be set in the paramerization of the device and approbiate actions can be defin

The MDT Object Controller 63 with integrated temperature and humidity sensor is used for indoor room temperature regulation. The comfort zone of the indoor climate is set via Min./Max. values at the parameterization of the ObjectController. Switch Acuator

The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX

The MDT Binary Input is available in 4 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and inputs fot potential free contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX

The MDT Heating Actuator receives KNX/EIB telegrams and controls up to independent electrical outputs.
Each channel has its own LED indicator

The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.

The MDT Shutter Actuator receives KNX/EIB telegrams and controls up to 8 independent shutter or sunblind drives.
Each output uses two monostable relays. The MDRC Shutter Actuators can be operated manually via a push button.

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 3 independent electrical loads (AKK-04FC.03 4 loads).
Each output uses a monostable relay and is individually agjustable via ETS. In operation mode as fan coil actuator a 3-step (A

The MDT Switch Actuator AKK receives KNX/EIB telegrams and switches up to 24 independent electrical loads.
Each output uses a bistable relay.

The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads. Each output uses a bistable relay, with mechanical manual operation for direct actuation of the relay contact.

The MDT LED Controller receives KNX/EIB telegrams and controls 12/24V RGBW LED stripes.

The MDT KNX Power Supply with integrated choke supplies the KNX Bus with a constant, stabilized 30VDC voltage. The integrated bus coupling unit with diagnostic function monitors the bus voltage, bus current, bus overload and bus voltafe failure/return. Al

KNX-RF Easy Mode
Wireless Dimmer for LED lamps.
Leading or Trailing edge dimming technology
Power capacity of up to 250W, depending on the type of lamp.

Remote control for lighting and shutters/blinds control.
Five different channels and five different scenes.

Wireless door/window contact sensor KNX-RF S-Mode for detecting the state (closed/open) of a door or window over the reed contact integrated in the device.
Battery-operated: 2 batteries x 3V CR2032. Useful life highr than 12 years.

Wireless Dimmer for 1-10V Ballast or LED Driver, for example, Fluorescence or LED lighting fixtures.
Can control up to a maximum of 100 equipments.Junction-box mounting.

1-channel Wireless KNX-RF S-Mode wireless Switching Actuator.
Normally open contact, not free of voltage, 16A relay.

4-channel Universal Dimming Actuator for:
· Incandescence and 230V Halogen lamps.
· LV Halogen lamp with electronic transformer.
· Dimmable 230V LED lamps.
· Dimmable 12V - LED lamps (electronic transformer).
Leading or Trailing edge dimming technolo

Universal Dimming Actuator for:
Incandescence and 230V Halogen lamps.
Leading or Trailing edge dimming technology.
1 channel with a maximum load capacity of 1.000W.

BACnet Application Specific Controller (B-ASC) as Gateway between KNX TP and BACnet IP
Up to 250 BACnet objects
Up to 455 BACnet COV subscriptions

Two outputs for switching and dimming resistive, inductive or capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V

Four outputs for switching and dimming of resistive, inductive and capacitive loads
Automatic adjustment to leading edge or trailing edge control, depending on the type of load
Rated operational voltage AC 230 V

Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 µF fluorescent lamp load)

Passive infrared detector for ceiling installation
Horizontal 360° motion detection area
Presence/motion detection up to 64 m² / 400 m² (depending on mounting or room height)

Rated contact current according to DIN EN 60669: 6 AX (70 µF fluorescent lamp load), 10 A (resistive load)

- 1 channel
- Modular installation device for mounting in AP 118 automation module box or AP 641 room control box

8 slots for a sensor/actuator module, type RS or RL
Internal bus cable for connection of the sensor/actuator module to the bus

One relay contact as switching element
Bus-powered electronics
Integrated bus coupling unit, Bus connection via bus terminal block
Type of protection: IP 20
Rated contact voltage AC 230 V
Rated contact frequency: 50/60 Hz
Rated contact current 16 AX

Smart 86 Switch: 6-button control with color display and temperature sensor. Versatile for smart home functions.

Compact KNX RF/TP Coupler 673.1 secure for integrating KNX RF devices, supports long frames & KNX Data Security.

The KNX IO 520 (1J2I) is a compact blind actuator with two additional binary inputs. The actuator is used to control a blind, a shutter or a window drive. The relay contacts are electrically interlocked.

Advanced leakage sensor with bus coupler, electrolytic measurement, alarm function, optical signaling, adjustable delay, and IP66 protection. Size: Ø70x24mm.