Universal DIN module with 4 digital inputs
€134,00 Excl. tax
€206,00 Excl. tax
€162,14 Incl. tax €249,26 Incl. tax. Out of stock, but available
€162,14 Incl. tax €249,26 Incl. tax. Out of stock, but available
Universal KNX DIN rail module with 4 digital inputs for potential-free contacts. Supports switching, dimming, shutters, scenes, pulse counting and logic. Suitable for sensor integration and thermostat control. Read more
Specifications
Brand:
eelectron
Article number:
BI04F01KNX
EAN:
8054144522272
Availability:
Out of stock, but available
Delivery time:
Dispatched within approximately 8 working days (please note: this is an estimate and depends on availability from the manufacturer; in some cases, it may be dispatched sooner, but it can also take longer).
Information
Universal DIN Module – 4 Digital Inputs (KNX)
Part number: BI04F01KNX | EAN: 8054144522272
The Eelectron BI04F01KNX is a universal KNX DIN-rail module featuring 4 digital inputs for potential-free contacts. The inputs can be flexibly parameterized to send on/off commands, dimmer controls, shutter/blind operations, scenes and sequences to the KNX bus. The device is intended for DIN-rail installation in low-voltage distribution boards.
Applications
- Interface between KNX and push buttons, magnetic contacts and other potential-free sensors
- Switching commands, dimming control and shutter/blind functions
- Scene recall and sequence activation
- Pulse counting when configured as digital (short distance)
Main features
- 4 independent digital inputs (potential-free)
- Configurable per input as short-distance or long-distance mode
- Long-distance line monitoring via EOL resistor 1.8 kΩ (1/8 W) for enhanced safety
- Pulse counter available in short-distance mode
- Status LED for each input on the front panel
- 10 logic blocks for simple or complex logical expressions
- Supports proportional control (e.g. temperature/humidity) and dew point calculation
- Fully configurable via KNX/ETS (scenes, timers, logic, sequences)
- Integrated KNX bus interface
- Note: Features such as NTC temperature probe support and smart sensor compatibility apply only to the 8-channel model (BI08F01KNX)
Technical specifications
| Model | BI04F01KNX |
|---|---|
| Brand | Eelectron |
| EAN | 8054144522272 |
| Number of inputs | 4 digital inputs (potential-free) |
| Operating modes | Short distance / long distance (configurable) |
| Line monitoring | EOL resistor 1.8 kΩ, 1/8 W (long-distance mode) |
| Pulse counter | Yes, in short-distance configuration |
| Status indication | LED per input |
| Logic | 10 logic blocks (threshold, algebraic, conditional) |
| Algorithms | Proportional control, dew point calculation |
| Configuration | ETS (scenes, timers, sequences) |
| Bus interface | KNX integrated |
| Installation | DIN-rail (low-voltage distribution board) |
Important notes
- When using long-distance mode, ensure the specified EOL resistor of 1.8 kΩ is applied.
- The pulse counting function is only available in short-distance mode.
- Analogue NTC and smart sensor functions are not applicable to this model, but to BI08F01KNX.
- Installation and configuration must be carried out by qualified personnel in accordance with KNX and safety standards.
