KNX/DALI Gateway – 1 Channel – Multi-Master Application Controller
€773,19 Incl. tax €859,10 Incl. tax. Out of stock, but available
Specifications
Information
Link zur Website von eelectron (Englisch)
KNX/DALI Gateway – 1 Channel – Multi-Master Application Controller
Part number: IC01D03DAL | EAN: 8054144522654
The Eelectron IC01D03DAL is an advanced KNX/DALI gateway with one channel, designed as a Multi-Master Application Controller for controlling electronic control gear (ECG) with DALI1/DALI2 interface. The device supports DALI-2 motion and light sensors in accordance with EN 62386-303/304 and enables constant light control directly via connected DALI-2 sensors.
The gateway converts switching and dimming commands from the KNX system into DALI telegrams and returns status or event information from the DALI bus back to KNX telegrams. Thanks to its integrated Multi-Master functionality, sensors, push buttons and control devices can operate in parallel within the same DALI segment.
Applications
- Integration of DALI lighting and sensors into KNX building automation
- Supports DALI1 and DALI2 lighting systems
- Constant light control using DALI-2 sensors for energy-efficient lighting management
- Ideal for commercial, public, and industrial buildings
- Supports emergency lighting (IEC 62386-202) with single or central battery systems
Main features
- 1 DALI channel – up to 64 electronic control gears (ECGs)
- Multi-Master Application Controller according to EN 62386-103 Ed.2
- Supports DALI1 and DALI2 devices, including motion and light sensors
- Up to 8 DALI-2 sensors (motion/light) and 8 DALI push buttons (4 channels per device)
- Supports 8 generic DALI inputs (physical quantities)
- Constant light control based on comparison of measured and target values
- Full KNX integration with Data Secure support
- Web interface for local configuration and monitoring
- Configuration via ETS5 (with DCA application)
- Display and control via LC display and front buttons
Technical specifications
| Power supply | 100–240 V AC/DC, 50–60 Hz |
|---|---|
| Power consumption | Max. 8 W |
| KNX bus power supply | SELV 24 V DC, approx. 5 mA |
| Number of DALI outputs | 1 |
| Output type | Multi-Master Application Controller according to EN 62386-103 Ed.2 |
| Max. number of ECGs | 64 (EN 62386-101 Ed.1/Ed.2) |
| Max. number of sensors | 8 DALI-2 motion or light sensors (EN 62386-303/-304) |
| Max. number of push buttons | 8 DALI push buttons (4 channels per device) |
| DALI voltage | Typ. 18 V DC, short-circuit proof, max. 250 mA, basic insulation (non-SELV) |
| Guaranteed supply current | 160 mA |
| Maximum supply current | 250 mA |
| Shutdown delay | 600 ms after short-circuit detection |
| Restart delay | 5 s after short-circuit recovery |
| KNX medium | Twisted Pair (TP), KNX Data Secure |
| Ethernet | 100BaseT (100 Mbit/s), RJ45 connector, DHCP or fixed IP |
| Housing | Plastic ABS-V0, 4 modules wide (72 mm) |
| Dimensions (H x W x D) | 58 x 72 x 90 mm |
| Weight | 160 g |
| Mounting | DIN rail (35 mm) according to EN 60715 |
| Protection rating | IP20 according to EN 60529 |
| Protection class | Class I according to IEC 1140 |
| Overvoltage category | Category III |
| Pollution degree | Degree 2 (EN 60664-1) |
| Operating temperature | -5 °C to +45 °C |
| Storage temperature | -25 °C to +55 °C |
| Transport temperature | -25 °C to +70 °C |
| Relative humidity | 5 % – 93 % (non-condensing) |
| Standards | EN 62386-101/-102/-103, EN 63044-5-3, EN 63044-5-1/-5-2 |
| Directives | Low Voltage Directive 2014/35/EU, EMC 2014/30/EU |
Indicators and controls
- 3 buttons: Move, Prg/Set, ESC for manual operation and configuration
- LC display: 2x12 characters for configuration and status display
- LEDs: Red (mode), Yellow (Ethernet link), Red (error indication)
Important notes
- Multi-Master operation according to EN 62386-103 Ed.2 is permitted.
- No additional DALI power supply required – the device powers the connected ECGs and sensors directly.
- Total DALI current must not exceed 160 mA guaranteed supply.
- Only use KNX and DALI components compliant with relevant standards.
- Installation and commissioning must be carried out by qualified personnel according to KNX/DALI standards.
Related products
Universal KNX-DALI gateway with 1 channel for controlling up to 64 DALI ECGs. Supports Tunable White (DT-8), group control, scenes, time scheduling and fault diagnostics via KNX.
€517,88 Incl. tax
KNX-DALI gateway with 2 independent channels controlling up to 128 ECGs (64 per channel). Supports Tunable White (DT-8), scenes, time schedules and fault diagnostics via KNX.
€746,57 Incl. tax
