Collection

KNX push-button for MATCH 55 series. Features flexible functions for switching, dimming, blind control, and scenes. Includes bus coupler, KNX Data Security, and logic.

Switch actuator with 4 C-load channels (16 A), current detection and manual control. Suitable for high lamp loads, expandable to 12 channels, DIN rail mounting, KNX compatible.

Double-sided KNX indoor clock Ø 400 mm with white dials, black Arabic numerals, bar hands, red second hand and white lacquered metal housing.

Round KNX indoor clock with black bar hands, red second hand, white dial with block numerals, and silver metal housing. Ø 400 mm.

Round KNX indoor clock with white dial, black Arabic numerals, black hour/minute hands and red second hand. Impact-resistant, Ø 400 mm.

Compact KNX USB interface between PC and KNX bus, ETS ready, supports KNX long frames, galvanic isolation, BAOS V2, HID/cEMI, DIN rail mount.

Router/interface/line coupler for secure data exchange between KNX and IP networks. Supports KNX IP Secure, with 5 tunneling servers and unicast for 10 devices.

Supplies and monitors KNX system voltage with 320 mA and 30 V DC. With reset button, short-circuit protection and DIN rail mounting. For one KNX line.

Four-channel KNX switching actuator, suitable for capacitive, inductive, and resistive loads. Supports logic operations, manual control, and time programs.

Round KNX indoor clock with white dial, black numerals and hands, red second hand. Ø 250 mm. Impact-resistant plastic housing and plexiglass.

Compact 4-channel KNX dimming actuator with constant current (12–48 V⎓, 500 mA/channel). Supports RGB/RGBW/Tunable White LEDs. With scenes, timers, KNX Data Secure.

Touch sensor with 2 buttons, status LEDs and temp. sensor. Available in white, black and silver. Supports KNX Data Secure and various control functions.

The MDT Push Button Lite 63 releases KNX telegrams depending on the paramerization after pressing the buttons. The push buttons can be programmed for 1 or 2 button operation (BE-TAL63x4.01: 4 single buttons). The RGBW status LEDs can be controlled with in

PIR presence detector for corridors, ceiling flush mounting, 28x5 m rectangular detection, 360°, KNX, light/presence channels, light measurement, temp sensor, IP54.

PIR presence detector from the LUXA 103 series, ceiling flush with spring clip, 360° detection, Ø 12 m, KNX, light/presence channels, light measurement, temp sensor, IP54.

PIR presence detector from the LUXA 103 series for ceiling mounting, 360° detection, Ø 12 m, KNX, 2 lighting and 2 presence channels, light measurement, day/night mode, temp sensor, IP54.

IP interface for KNX networks with tunneling, powered via 12–30 V DC or PoE. Status LEDs, DIN-rail mounting, compact design, IP20, KNX certified.

DALI gateway for integrating up to 64 DALI devices into KNX systems. Supports group and scene control, color management (DT8), emergency lighting, display and web server.

Valve adapter for Onda, Schlösser (from 1993), Oventrop (M 30 x 1.5), Heimeier, Herb, Therm-Concept, Frank, Roth and Dinotherm distributors. Other adapters on request.

Valve adapter for connecting Danfoss RA valves to ALPHA 4 actuator. Also suitable for CHEOPS. Other adapters (e.g., Velta, Herz, Giacomi) available on request.

Temperature sensor for floor installation. Suitable for Ramses 83x thermostats. 4 meters long. IP 65 protection. Ensures precise control and reliable overheating protection.

KNX push-button interface with 4 potential-free inputs for switches/contacts, 2 LED outputs, test buttons, status LEDs and KNX Data Security support.

Line coupler for connecting and galvanically separating KNX lines. Supports Long Frames (from ETS 5), Data Secure, and repeater functionality.