Universal Module 12 OUTPUTS Plus 16A/16AX – lighting, blinds & HVAC
€307,34 Incl. tax €545,71 Incl. tax. Out of stock, but available
Specifications
Information
Universal Module 12 OUTPUTS Plus – 16A / 16AX C-load
Article number: BO12F01KNX
The Universal Module 12 OUTPUTS Plus is a high-performance KNX switching actuator featuring twelve relay outputs (16A/16AX – suitable for C-loads) for professional control of lighting, HVAC, blinds, roller shutters, 3-point valves, PWM valve actuators and fan coil units. With its flexible configuration, the device is suitable for both residential and commercial applications.
Functions & configurations
- 12 outputs for lighting and load control
- 12 PWM channels for valve actuators (solenoid valves)
- 6 channels for blind or shutter control
- 6 channels for 3-point valve control (bidirectional)
- Fan coil configurations:
- 3 fan coil actuators (2-pipe systems)
- 2 fan coil actuators (4-pipe systems)
- Logic interlock for combining 2 or 3 relays (e.g. 4-pipe or 3-speed fan coils)
- Relay grouping (up to 6 combined relays) for special functions
- Manual operation via front-mounted buttons
- Status LED indication per channel
Technical data
Outputs:
– 16A cos φ 1 – 230 V AC
– 8A cos φ 0.6 – 230 V AC
– 16A / 16AX (140 μF) – suitable for C-loads
– Maximum total device current: 180 A
– Minimum switching current: 10 mA
– Maximum peak current: 165 A / 20 ms
– Incandescent/halogen lamps: max. 10 A
– Fluorescent lamps (max. 140 μF): max. 3 A (700 W)
– LED drivers / electronic ballasts: max. 6 A (check inrush current)
– Motors / actuators: max. 10 A
HVAC control:
– Support for PWM valve actuators (solenoid valves)
– Control of 3-point valves (open/close/stop)
– Fan coil control: 2-pipe and 4-pipe systems
– Logic interlock for 4-pipe or 3-speed fan coils
– Suitable for heating, cooling and mixed HVAC applications
Inputs (when used with IO models):
– Supports potential-free (dry contact) inputs
– Cable length: up to 30 m (twisted pair)
– Analogue temperature measurement with NTC sensors (TS01A01ACC / TS01B01ACC)
Communication & power supply:
– KNX bus power: 21–32 V DC
– Consumption: approx. 10 mA
– Maximum consumption during switching: 10–30 mA (ETS parameter)
– KNX TP1 communication interface
– microSD version (BO12F01KNX-SD): stores ETS configuration for fast device replacement
Mechanical:
– Installation on standard DIN rail (EN 60715)
– Dimensions: 6 modules
– Housing: PC-ABS
– Protection rating: IP20 (EN 60529)
Available variants – F-Series
The Universal OUTPUTS Plus series is available with:
- 4, 8, 12, 16 and 24 outputs
Additionally, IN/OUT PLUS models with integrated binary inputs are available:
- IO04F01KNX – 4 IN / 4 OUT
- IO08F01KNX – 8 IN / 8 OUT
- IO12F01KNX – 12 IN / 12 OUT
- IO16F01KNX – 16 IN / 16 OUT
Thanks to these variants, the F-Series is ideal for pure relay control as well as projects that combine local inputs, sensors and advanced HVAC control.
Related products
Switching actuator/I/O with 4 relay outputs 16A/16AX for C-loads and 4 potential-free inputs. Suitable for lighting, HVAC, blinds and scenes. Supports NTC sensors, thermostat functions and flexible KNX configuration.
€183,92 Incl. tax
KNX Universal Module 8 OUTPUTS Plus with eight 16A/16AX relay outputs for C-loads. Suitable for lighting, HVAC, blinds, 3-point valves and fan coils. Supports PWM valves, logical interlock and manual operation.
€249,26 Incl. tax
KNX Universal Module 16 OUTPUTS Plus with sixteen 16A/16AX relays for C-loads. Suitable for lighting, HVAC, blinds, 3-point valves, PWM actuators and fan coils. Supports logic interlock, grouped relay modes and manual control.
€363,00 Incl. tax
