Dimming actuators

Constant Current (CC) LED dimmer with 3 channels (220-1000 mA) for RGB or individual channels. KNX compatible with a test button and surface mounting.

Universal dimmer with 2 outputs (2x300 VA or 1x500 VA) for switching/dimming resistive, inductive, or capacitive loads. Automatic phase detection. Rated voltage 230V AC.

Flush-mounted dim actuator with 1 channel, auto load detection, adjustable dim curve, binary inputs, and KNX Data Secure. Supports LED, halogen, and transformers.

Universal 8-channel dimmer actuator for LED, halogen, and incandescent lamps. Supports phase-cut dimming (leading/trailing edge), with 4W to 250W per channel, programmable via ETS5.

The LCM-25KN is a 25W constant current LED driver with selectable current levels via DIP switch, KNX interface, and flicker-free design. Supports emergency lighting and constant light output.

2-channel 1–10 V control unit for dimming/switching EVG and LED gear. MIX base module, expandable to 6 channels. Manual control and status LEDs.

Universal KNX dimming actuator for DIN-rail with 2 channels (210 W/230 V per channel). Supports RLC, dimmable LED, and CFL. Auto load detection and configurable dimming curves.

Universal flush-mounted dimmer with 1 channel - 250 W (230 VAC) / 200 W (110 VAC). Auto load detection, configurable dimming curves, manual control, and 2 analog/digital inputs. Overload and short-circuit protection.

Universal DIN-rail dimmer (350 W) with automatic load detection (RLC, LED, CFL). Manual control, fault detection, and adjustable dimming curve included.

The flush-mount LED controller dims 12V/24V CV LEDs, offering Tunable White, RGB(W), and dynamic daylight control. 2 channels, each 3A.

Universal dimmer with one channel for LED, halogen, and incandescent lamps. Suitable for leading or trailing edge, max. 1000W load. DIN-rail mounting.

200W Constant Voltage LED driver with PWM output, adjustable frequency up to 4kHz, KNX data secure, no KNX-DALI gateway needed. 0.01% dimming level, lifespan >50,000 hours.

120W PWM LED driver with 12V constant voltage and PWM output for optimal light quality. KNX compatible, IP67 enclosure, overload, and temperature protection.

2-channel dim actuator for LED, halogen and CFL. Min. 5 W, max. 2 x 400 W or 1 x 800 W. Expandable up to 2000 W with boosters. Manual operation.

Compact LED controller with integrated power supply for constant current (700/1400 mA) and constant voltage, suitable for 60 W output. Supports tunable white, automatic dimming, and hybrid dimming mode.

Dimmer for KNX, compatible with various lamps (halogen, LED), creates scenes, and offers secure KNX Data Secure protection for modern lighting.

Compact dimmer for RGB, RGBW, and Tunable White LEDs with 4 outputs (500 mA per channel). Supports scenes, sequences, and time logic. Easy KNX operation.

4-channel KNX universal dim actuator for R, L, C loads. For LED, halogen, incandescent, CFL. 200 W per channel. Manual control, load detection.

LED controller with 2 channels, 30 W power. Supports hybrid dimming, constant current (700 mA) and voltage (24/48V). Suitable for Tunable White and HCL lighting.

Three-channel 1-10V dimming actuator for LED and fluorescent lighting with 3A per channel. Compatible with KNX bus, manual operation, overload, and overheating protection.

Universal 4-channel dimming actuator for LED, halogen, and incandescent lamps. Supports phase-cut and phase-dim technologies. Protected against overload and short circuits. DIN-rail mounted.

Dimmer for switching and dimming up to 300 VA per channel, max. 1000 VA with bundling. Compatible with LED, halogen, and incandescent lamps. Includes scene control.

Compact KNX dimmer and switch module with 1 PWM output for LED lighting and a bistable relay. Ideal for dimmable LED panels or strips, with features like scenes, timers, and heating control.

The KNX IO 530 (1D2I) is a dimmer with one output (max. 200 W) and two 230 V~ binary inputs. Supports phase-cut dimming, scenes, automation, and sleep mode.