Collection

The Mean Well LCM-60KN is a 60W constant current LED driver with adjustable output current (500mA-1400mA). Suitable for emergency lighting and dimmable via KNX interface, directly connectable to KNX.

Gateway between KNX and DMX512 bus for controlling 512 channels, 64 scenes and 16 sequences. DIN rail mounting (6TE), galvanically isolated.

Interface for KNX RF+ system, suitable for 230VAC signals. Supports switches, blinds, and pulse counting. Flexible installation without KNX bus cables, flush-mounted.

Mini presence detector for ceiling mounting, 1 pyro sensor, 360° detection, up to 4 m range, light sensor, bus coupling, suitable for KNX systems.

The MDT LED Indicator 55 with 12 individually switchable RGB LEDs displays various status messages in three colors (red, green, blue). Fits GIRA, BERKER, JUNG, and MERTEN 55 mm systems. Logic functions and adjustable brightness.

Compact 6-fold push button with status and orientation LED. Compatible with various 55mm switch ranges. Flexible functions, integrated bus coupling,

Push-button with color display, 4-button control, RGBW status LEDs, temperature and humidity sensor, automatic brightness adjustment. Fits 55 mm systems.

The Tastsensor Lite 55, white glossy, 4-fold, offers programmable buttons with RGBW status LEDs, versatile functions for switching, dimming, shutter control, and is also available with a temperature sensor.

The Push-button Lite 55 Basic 1-fold, available in pure white glossy or black matte, offers versatile KNX functionalities for switching, dimming, and shutter control, with programmable buttons and 4 logic blocks.

The Glass Push-button II Lite 2-fold, available in white or black and with or without temperature sensor, offers flexible control for lighting, blinds, and scenes. Choice of symbols and RGBW status LEDs.

The JAL-0410D.02 shutter actuator provides precise control of 4 motors at 24VDC with a maximum power of 180W per channel. Features advanced functions like sun position calculation and separate travel times for optimal shading.

24V KNX weather sensor for wind, rain, brightness and temperature. Controls sun shading for 8 façades with heated rain sensor.

24V KNX combi sensor with GNSS for wind, rain, brightness and temperature. Enables automatic shading for up to 8 façades. Includes heated rain sensor.

Hydrostatic fill level sensor with temperature detection for oil. Measures up to 10 m. Includes 15 m cable. KNX integration, IP65, configurable locally or via ETS.

KNX temperature sensor for surface-mounted indoor room control. Measures temperature, includes control and alarm functions, two binary I/Os, PWM output and logic blocks.

KNX brightness sensor with lux measurement (3–220,000 lux) and external PT1000 input. Designed for climate and lighting control in smart buildings.

Surface-mounted KNX sensor with integrated temperature and humidity sensors. Designed for chilled ceilings, pipes, and condensation-prone areas.

KNX water temperature sensor with IP68 rubber probe and IP65 housing. Supports heating, cooling, alarms and logic for HVAC systems.

The Square TMD belongs to the Square TMD series and is a capacitive touch sensor with 4 controls, backlighting, thermostat, and temperature sensor. Available in various colors and customizable design.

Decorative frames for 3-gang switches and wall sockets of the ZS55 series. Available in various colors. It protrudes 9.5 mm from the wall. Halogen-free.

Flush-mounted KNX motion detector with 0/1/2 touch buttons, adjustable sensitivity, and backlight. Detection angle 180°, range 10 m. Fits 55x55 mm frames.

Controller for 2/4-pipe fan-coil units with 0-10 V fan control. 4 multifunction outputs, 4 analog/digital inputs, 2 thermostats, DIN rail mounting.

Zennio MINiBOX 0-10V X1 actuator with 1 analog channel, configurable as 0-10 V output, 0-10 V, or 4-20 mA input. Includes manual control and logic functions.

Accessory for KES Plus, designed for accurate current measurements up to 120 A. Compact design (46x30.8x29.5mm) with CE compliance. Cable diameter Ø16mm.