Zennio

KNX solutions for homes, hotels, and offices

Zennio is a Spanish specialist in smart KNX automation for residential, hotel, and commercial buildings. With over 250 certified products, Zennio delivers innovative touch panels, switches, sensors, and modules for lighting, climate, shading, access, and energy management. Fully customizable designs and powerful features offer comfort, energy savings, and ease of use, supported by an experienced global team.

RemoteBOX – Remote control device for KNX systems

RemoteBOX is a smart DIN-rail module that enables app control of KNX systems, including lighting, climate and shading. Up to 180 functions. ETS setup by a KNX programmer or system integrator is required.

€198,03 Excl. tax
€239,62 Incl. tax
Orderable
MINiBOX 45 v3 | 4 outputs 16 A / 5 inputs A/D

KNX multifunction actuator with KNX Secure, 4 configurable outputs (16 A C-load), 5 analog/digital inputs, logic functions, thermostats, and shutter control.

€193,11 Excl. tax
€233,66 Incl. tax
Orderable
RailQUAD Input module with 8 analog-digital inputs

KNX RailQUAD 8 input module for DIN-rail with 8 analog-digital inputs. Compatible with Zennio sensors. Suitable as binary input, temperature probe, or motion sensor. Includes 8 thermostats.

€144,20 Excl. tax
€174,48 Incl. tax
Orderable
KLIC-DD v3 Bus KNX to Daikin Residential

Gateway zur KNX-Steuerung von Daikin-Klimaanlagen. Mit 2 analogen/digitalen Eingängen, bidirektionaler Kommunikation, 10 logischen Funktionen und Datenspeicherung bei KNX-Busausfall. Kompaktes Design für Einbau.

€150,95 Excl. tax
€182,64 Incl. tax
Orderable
DALI BOX Interface 64 v3 | KNX DALI Interface 64 ballasts, 1 channel

KNX-DALI interface for DIN rail mounting. Supports up to 64 DALI ballasts per channel. Compatible with DT1/DT8, includes display and error detection.

€375,73 Excl. tax
€454,64 Incl. tax
Orderable
Multi actuator flush, 2 outputs (16A C-Load) & 4 analog-digital in.

Multifunction actuator with 2 outputs and 4 analog-digital inputs. Offers manual control, 4 thermostats, 10 logic functions, and advanced lighting control for flexible automation.

€115,53 Excl. tax
€139,79 Incl. tax
Orderable
ZMCoup RF 868 | KNX TP-RF Media Coupler (868 MHz)

KNX TP/RF media coupler (868 MHz) for wireless communication. Features internal antenna, 254-byte APDU length, and energy-saving during bus failures.

€126,49 Excl. tax
€153,05 Incl. tax
Orderable
MAXinBOX 12 | Multifunctional actuator, 12 outputs (16 AC-Load) Secure

KNX actuator with 12 configurable outputs (16 A), usable individually as switch actuators. Suitable for shutter control, fan regulation, and KNX Secure.

€304,57 Excl. tax
€368,53 Incl. tax
Orderable
MAXinBOX 16 v4 | Multi.Actuator.16 outputs (16 AC-Load) Secure

KNX actuator with 16 configurable outputs (16 A), usable individually or as shutter and fan channels. Supports KNX Secure and logic functions.

€373,55 Excl. tax
€451,99 Incl. tax
Orderable
MAXinBOX 8 v4 | Multifunctional actuator, 8 outputs (16 AC-Load) Secure

Multifunctional actuator with 8 outputs (16A C-Load) for KNX systems. Suitable for blinds, individual channels, and 2-pipe fan coils. KNX Secure compatible.

€222,42 Excl. tax
€269,13 Incl. tax
Orderable
MAXinBOX 88 | 8 4 outputs 16 A / 8 inputs A/D

Multifunctional KNX actuator with 8 configurable outputs (16 A C-Load) and 8 analog/digital inputs. Outputs can be used individually as a switch actuator. Suitable for shutters, heating, and KNX Secure.

€270,69 Excl. tax
€327,54 Incl. tax
Orderable
ZEMKEM KNX-Energy Monitor | 5 inputs

KNX energy monitor for electricity, water, and heat. Monitors 3 circuits (20 A), 4 water flows, and 2 climate systems. Includes 10 logic functions, alerts, and data storage.

€142,81 Excl. tax
€172,80 Incl. tax
Orderable
IWAC Out Keypad In-Wall | Access Controller

Access control device with illuminated keypad, KNX Secure support, and IP56 protection. Simple PIN management, suitable for indoor and outdoor use.

€196,13 Excl. tax
€237,32 Incl. tax
Orderable
NarrowDIM X4 | 4-channel, universal RLC, LED, CFL 210-750W

Universal dimming module with 4 channels for RLC, LED, and CFL loads (dimmable). Up to 750 W at 230 VAC. Automatic load detection and manual control.

€274,95 Excl. tax
€332,69 Incl. tax
Orderable
MAXinBOX SHUTTER | KNX Blind Actuator | 8-channel, Secure

Roller shutter and blind actuator with 8 channels and KNX Secure. Offers 20 logical functions, manual operation, and output timing. Suitable for DIN rail mounting and provides protection against bus failure.

€293,72 Excl. tax
€355,41 Incl. tax
Orderable
KLIC-DA v2 KNX-Daikin Altherma Gateway | ZCLDAV2

Gateway for KNX-Daikin Altherma units. Bidirectional control, 2 inputs for sensors, 10 logic functions, data saving on power failure.

€212,50 Excl. tax
€257,13 Incl. tax
Orderable
ZSYIPRCL KNX-IP-Router

KNX-IP router for connecting KNX lines via IP, with tunneling and routing. No additional power supply needed. DIN rail mount, integrated KNX BCU.

€405,79 Excl. tax
€491,01 Incl. tax
Orderable
Lumento X4 v2 PWM CV Dimmer 4 channels for LED loads

4-channel Constant Voltage PWM LED dimmer with 12-40 V power. Supports RGBW, HCL, and color temperature control. Max load: 8 A/channel, 20 A total. KNX Secure.

€164,44 Excl. tax
€198,97 Incl. tax
Orderable
ALLinBOX 46 Multi-device KNX-IP Interface, 4 outputs, 6 inputs

Multifunctional KNX device with 160 mA power supply, IP interface, 4 outputs (16 A), 6 inputs, logical module, and 4 thermostats. Ideal for advanced control and monitorin

€371,31 Excl. tax
€449,29 Incl. tax
Orderable
AudioInRoom KNX Audio-Controller | Bluetooth, AUX

KNX audio system for hotel rooms with Bluetooth and AUX. Provides 2 channels, volume control, and password security. Suitable for ceiling speakers.

€231,63 Excl. tax
€280,27 Incl. tax
Orderable
MINiBOX 0-10V X1 | Universal actuator 1 0-10 V | 1-channel

Zennio MINiBOX 0-10V X1 actuator with 1 analog channel, configurable as 0-10 V output, 0-10 V, or 4-20 mA input. Includes manual control and logic functions.

€119,74 Excl. tax
€144,89 Incl. tax
Orderable
KLIC-LG1 KNX-LG Gateway | ZCL-LG1

Gateway for bidirectional control of LG air conditioners via KNX, with 3 analog/digital inputs for sensors or switches and 10 logical functions.

€150,95 Excl. tax
€182,64 Incl. tax
Orderable
KNX-IP interface with KNX Secure (KIPI SC)

Interface for bidirectional communication between Ethernet and KNX TP, supports KNX Secure, 5 connections, max. APDU 254 bytes, DIN-rail mounting.

€183,83 Excl. tax
€222,44 Incl. tax
Orderable
KLIC-MITT v3 KNX-Mitsubishi Electric Gateway (IT connector)

Gateway for bidirectional control of Mitsubishi Electric air conditioners via KNX. Includes 2 analog-digital inputs, 10 logic functions, and full data recovery.

€150,95 Excl. tax
€182,64 Incl. tax
Orderable
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »