Zennio

Compact KNX interface with 4 configurable channels (binary/LED) and 1 temperature sensor input. Supports KNX Secure, fits standard wall boxes.

.Wireless KNX RF motion detector with PIR technology for ceiling mounting. Detection range up to 6 m, adjustable sensitivity, battery-powered, low battery warning. Available in white and black.

Multifunctional KNX actuator with 8 configurable outputs (16 A C-Load) and 8 analog/digital inputs. Outputs can be used individually as a switch actuator. Suitable for shutters, heating, and KNX Secure.

Fan-coil controller for 2/4-pipe units, featuring 2x16A outputs and 6 multifunction inputs. Supports KNX Secure, manual control, and logic functions.

KNX heating actuator with 4 outputs and 4 inputs. Suitable for 230 V valves with short-circuit protection. Includes thermostats and logic functions.

Gateway for KNX-Daikin Altherma units. Bidirectional control, 2 inputs for sensors, 10 logic functions, data saving on power failure.

Sleek Zennio temperature sensor for the Flat series, maintaining aesthetic consistency. Flush mount with 0.5 ºC accuracy at 25 ºC. Available in white, glossy white, silver, and black.

KNX ceiling presence detector with brightness and temperature sensors. 360° detection, 30 m diameter. Adjustable sensitivity, constant light regulation, and thermostat.

Multifunctional KNX device with 160 mA power supply, IP interface, 4 outputs (16 A), 6 inputs, logical module, and 4 thermostats. Ideal for advanced control and monitorin

Gateway for bidirectional control of LG air conditioners via KNX, with 3 analog/digital inputs for sensors or switches and 10 logical functions.

Multifunction actuator for flush mounting with 2 configurable outputs (16 A C-Load). Supports shutter control, logic functions, manual operation, and data saving.

Motion detector with PIR technology and light sensor for ceiling mounting. Compatible with Zennio devices. Ø6 m detection range, compact, easy to install, no extra power required. Available in white and anthracite. Note: NOT a KNX component.

Water flow sensor with temperature probe for precise measurements. Helicoidal rotor design, Hall sensor technology, and durable brass housing.

1-gang capacitive KNX touch sensor for 55×55 mm frames with RGB backlight, acoustic feedback, built-in thermostat, temperature sensor, 2 inputs and full KNX Secure support.

Compact interface with 2 configurable channels (binary in/LED out) and 1 temperature sensor input. Perfect for KNX systems and room control.

Multifunctional KNX actuator with 2 outputs (16 A C-Load), supporting KNX Secure. Features manual control, logic functions, and advanced configuration options.

KNX-IP router for connecting KNX lines via IP, with tunneling and routing. No additional power supply needed. DIN rail mount, integrated KNX BCU.

Flat 70 capacitive glass switch 70x70 mm, 4-gang, with backlight, proximity sensor, and inputs. Includes thermostat and sensors. KNX Secure compatible. Available in various colors.

Universal DIN-rail dimmer (600 W total, 310 W per channel). 2 channels for RLC, LED, and CFL, with auto-detection, manual control, and logic functions. Includes 2 analog/digital inputs.

Universal DIN-rail dimmer (350 W) with automatic load detection (RLC, LED, CFL). Manual control, fault detection, and adjustable dimming curve included.

The Zennio Tecla RGB 55 X6 is a 6-gang capacitive KNX touch sensor with RGB backlighting, KNX Secure, built-in thermostat, temperature sensor and configurable inputs for smart building control.

The Square TMD belongs to the Square TMD series and is a capacitive touch sensor with 4 controls, backlighting, thermostat, and temperature sensor. Available in various colors and customizable design.

Universal KNX interface with 4 binary inputs and 4 LED outputs. Supports sensors, switches, and LED control. Compact design for easy installation.

KNX power supply (160 mA) with 29 VDC auxiliary output. Ideal for small KNX installations. Includes overload and short-circuit protection. DIN rail mount.