Zennio

KNX-DALI interface with 4 channels (64 ballasts/channel). Supports DT8, 20 scenes, manual control, error detection, and automatic ballast detection.

2-channel Constant Voltage PWM LED dimmer for DC loads with 12-40 V power supply. Supports HCL and color temperature control. Max load per channel: 8 A. KNX Secure compatible.

4-fold capacitive touch sensor with customizable icons, backlighting, and integrated thermostat. Available in white, silver, anthracite, or custom.

KNX touch sensor with 4 zones, thermostat, and sensors for temperature, brightness, and proximity. Customizable icons and backlighting. Fits international back boxes. Available in white, silver, anthracite, or custom design.

Motion detector with PIR technology and light sensor for ceiling mounting. Compatible with Zennio devices. Ø6 m detection range, compact, easy to install, no extra power required. Available in white and anthracite. Note: NOT a KNX component.

Accessory for flush mounting in drywall for Flat v2 and IWAC Display. Suitable for wall thicknesses of 13-18 mm. Not suitable for fire-rated walls. Internal temperature sensor and acoustic functions are disabled when mounted.

Flat 55 series: Single capacitive touch sensor with backlighting. Available in white, silver, black, or custom design. Also offered in 2- and 4-button versions.

Kapazitiver Touch-Schalter mit Hintergrundbeleuchtung und 6 Tasten. Anpassbares Glasdesign mit integriertem Temperatur-, Bewegungs- und Näherungssensor.

Flush-mounted KNX motion detector with 0/1/2 touch buttons, adjustable sensitivity, and backlight. Detection angle 180°, range 10 m. Fits 55x55 mm frames.

Fan-coil controller for 2- or 4-pipe systems with 0-10 V valves, up to 4 fan speeds, 4 multifunctional inputs, and logic functions.

Universal DIN-rail dimmer (600 W total, 310 W per channel). 2 channels for RLC, LED, and CFL, with auto-detection, manual control, and logic functions. Includes 2 analog/digital inputs.

Multifunction actuator for flush mounting with 2 configurable outputs (16 A C-Load). Supports shutter control, logic functions, manual operation, and data saving.

2 touch buttons with status indicators (Do Not Disturb/Make Up Room), night mode, and acoustic feedback. Ideal for hotel room control and external visualization.

Gateway zur KNX-Steuerung von Daikin-Klimaanlagen. Mit 2 analogen/digitalen Eingängen, bidirektionaler Kommunikation, 10 logischen Funktionen und Datenspeicherung bei KNX-Busausfall. Kompaktes Design für Einbau.

Heating actuator for 6 outputs 230 VAC and 6 inputs. Features thermostats, manual control, LED indicators, and logic functions. Ideal for water-based climate systems.

The TMD Plus 8-fold KNX capacitive touch sensor features a standard or customizable design on tempered glass with an aluminum or plastic frame in various colors. Includes thermostat, temperature sensor, status LEDs, and magnetic mounting.

Comb busbar for MAXinBOX actuators, compatible with various models. Conforms to CE, UKCA, and RCM. Fire-resistant up to 960 °C per IEC 60695-2-11.

Multifunction device with KNX power supply, KNX-IP interface, 6 inputs, and 5 outputs. Suitable for 2-pipe fan coil units and a 16A C-Load relay.

Accessory for KES Plus to measure currents up to 600 A. Provides accurate energy data with CE conformity. Compact design (92x66x48.5mm), Ø36mm cable.

Multifunctional KNX device with 160 mA power supply, IP interface, 4 outputs (16 A), 6 inputs, logical module, and 4 thermostats. Ideal for advanced control and monitorin

KNX heating actuator with 4 outputs for 24 VAC/DC valves. Features short-circuit protection, independent thermostats, and logic functions.

The Square TMD belongs to the Square TMD series and is a capacitive touch sensor with 4 controls, backlighting, thermostat, and temperature sensor. Available in various colors and customizable design.

Decorative frames for 3-gang switches and wall sockets of the ZS55 series. Available in various colors. It protrudes 9.5 mm from the wall. Halogen-free.

Controller for 2/4-pipe fan-coil units with 0-10 V fan control. 4 multifunction outputs, 4 analog/digital inputs, 2 thermostats, DIN rail mounting.