Zennio

Universal flush-mounted dimmer with 1 channel - 250 W (230 VAC) / 200 W (110 VAC). Auto load detection, configurable dimming curves, manual control, and 2 analog/digital inputs. Overload and short-circuit protection.

Access control device with illuminated keypad, KNX Secure support, and IP56 protection. Simple PIN management, suitable for indoor and outdoor use.

Universal DIN-rail dimmer (600 W total, 310 W per channel). 2 channels for RLC, LED, and CFL, with auto-detection, manual control, and logic functions. Includes 2 analog/digital inputs.

Capacitive touch sensor with 6 touch zones, customizable icons, and backlighting. Integrated sensors for brightness, proximity, and temperature. Available in white, silver, anthracite, or custom design. Compatible with 70x70 mm frames.

KNX TP/RF media coupler (868 MHz) for wireless communication. Features internal antenna, 254-byte APDU length, and energy-saving during bus failures.

KNX interface for 4 consumption meters with S0 pulse outputs. Measures electricity, water, and gas consumption. Battery buffering for power failure and LED indicators.

The Zennio Presentia W1 v2 is a KNX motion detector for flush mounting, with 1 push button. Detects motion up to 10 meters, with adjustable sensitivity and backlighting.

Multifunction actuator for flush mounting with 2 configurable outputs (16 A C-Load). Supports shutter control, logic functions, manual operation, and data saving.

The TMD Plus 6-fold KNX capacitive touch sensor features a standard or customizable design on tempered glass with an aluminum or plastic frame in various colors. Includes thermostat, temperature sensor, status LEDs, and magnetic mounting.

4-channel KNX Secure shutter actuator with manual control, 20 logic functions, and data retention during bus failure. Suitable for DIN rail mounting. Ideal for efficient blind or shutter control.

Compact 6.5'' coaxial loudspeaker with built-in tweeter. White metal grille, adjustable clamps, frequency range 55 Hz – 22 kHz, 8 Ω.

Sleek Zennio temperature sensor for the Flat series, maintaining aesthetic consistency. Flush mount with 0.5 ºC accuracy at 25 ºC. Available in white, glossy white, silver, and black.

4-channel shutter actuator with automatic travel time measurement, 6 alarms per channel, manual control with LED indicator, KNX Secure support, and logic functions.

Constant Current (CC) LED dimmer with 3 channels (220-1000 mA) for RGB or individual channels. KNX compatible with a test button and surface mounting.

Gateway for bidirectional control of Samsung VRF and industrial HVAC via KNX. Two analog/digital inputs, 10 logic functions, compact DIN rail mount.

Capacitive touch sensor with 2 touch zones, customizable icons, and backlighting. Integrated sensors for brightness, proximity, and temperature. Available in white, silver, anthracite, or custom design. Compatible with 70x70 mm frames.

Motion detector with PIR technology and light sensor for ceiling mounting. Compatible with Zennio devices. Ø6 m detection range, compact, easy to install, no extra power required. Available in white and anthracite. Note: NOT a KNX component.

The TMD Plus 4-fold KNX capacitive touch sensor features a standard or customizable design on tempered glass, with an aluminum or plastic frame in various colors. Includes thermostat, temperature sensor, status LEDs, and magnetic mounting.

Multifunction device with KNX power supply, KNX-IP interface, 6 inputs, and 5 outputs. Suitable for 2-pipe fan coil units and a 16A C-Load relay.

Gateway for bidirectional KNX control of Fujitsu, General, Hiyasu, and Fuji Electric air conditioners via 3-wire connection. Includes 3 inputs and logic functions.

Kompakte KNX-Schnittstelle mit 6 konfigurierbaren Kanälen (Binär/LED) und 1 Temperatursensoreingang. Unterstützt KNX Secure und passt in Standard-Wanddosen.

Flat 70 capacitive glass switch 70x70 mm, 1-gang, with backlight, proximity sensor, and inputs. Includes thermostat and sensors. KNX Secure compatible. Available in various colors.

The Flat XL X8 belongs to the Flat XL series and is an 8-fold capacitive touch sensor with programmable buttons, LED backlighting, proximity and brightness sensor, built-in thermostat, and temperature probe.

Multifunction actuator with 3 configurable analog channels (0-10 V inputs/outputs or 4-20 mA inputs). Includes manual control, 3 thermostats, and 10 logic functions.