Theben

Heating actuator for 6 circuits, 24 V DC or 0–10 V DC. No KNX thermostat needed. Includes 2 pump controls, wall mounting and integrated power supply.

Valve adapter for Onda, Schlösser (from 1993), Oventrop (M 30 x 1.5), Heimeier, Herb, Therm-Concept, Frank, Roth and Dinotherm distributors. Other adapters on request.

Double-sided KNX indoor clock with white dial, fine line markings, white lacquered metal housing, plexiglass and 10-day power reserve. Includes 150 mm wall/ceiling bracket.

Ceiling-mounted PIR presence detector, 360° detection, 50 m², KNX, 2 light and HVAC channels, daylight sensing, temperature sensor, IP55.

KNX optical sensor set for ceiling surface mounting, 24V DC. Includes optical sensor, PIR unit and surface frame. Rectangular detection, light/presence control, temperature sensor.

DALI gateway for integrating up to 64 DALI devices into KNX systems. Supports group and scene control, color management (DT8), emergency lighting, display and web server.

4-fold RF flush-mounted button interface, 4 binary inputs and 1 for temperature sensor, KNX Data Secure. Flexible function assignment, compact and easy to install.

6-fold binary input, MIX2 base. 10 V DC – 240 V AC, max. cable length 100 m. Expandable to 18 channels, manual control, LED per channel, KNX module replaceable without reprogramming. SELV-compatible.

Round indoor KNX clock with white dial (Ø 300 mm), black numerals, black hour and minute hands, red second hand. Impact-resistant plastic housing with matt plexiglass.

4-fold blind actuator without KNX module. Expansion for a MIX2 base unit with KNX intelligence. For shutters and ventilation. 6 A per channel.

Cover ring for neat integration of theRonda UP, theMova P and thePassa P. Available in black and grey. Provides a clean finish for flush-mounted detectors.

Weather station for wind, rain, brightness and temperature. Automatic shading for up to 8 façades, with rain sensor and KNX integration.

8-fold KNX push-button interface with Data Secure, temperature measurement, LED control and flexible functions. Suitable for flush mounting with standard switches.

For indoor and outdoor corner mounting of motion detectors. Suitable for white and black versions. Includes mounting material. For use indoors and outdoors.

Digital timer with annual and astro program, 8 channels, DCF/GPS time sync, 800 memories, holiday, pulse and cycle program, KNX and mains power, DIN rail.

8-channel switch actuator, 16A, expandable to 24 channels, manual control, LED status, DIN rail, KNX compatible, base module MIX2, suitable for high lamp loads.

12-channel KNX heating actuator/regulator with 12 P/PI controllers for 12 thermal actuators (24–240 V AC), in 4 groups. Includes protection, LED display, manual control.

Square KNX clock (400×400 mm) with block digits, safety glass and ball protection (DIN 18032-3). Requires KNX bus power only. Perfect for sports halls and schools.

Twilight switch with external light sensor. 10 channels, 4 threshold, 6 logic channels, manual control, display lighting and PIN security.

8-channel shutter actuator 24 V FIX2 for KNX with manual control, LED and SELV. 6 A at 24 V DC. For blinds, shutters, skylights and ventilation.

Touch sensor with 2 buttons, status LEDs and temp. sensor. Available in white, black and silver. Supports KNX Data Secure and various control functions.

Supplies and monitors KNX system voltage with 320 mA and 30 V DC. With reset button, short-circuit protection and DIN rail mounting. For one KNX line.

Connects KNX-RF to KNX TP, powered via bus, supports KNX Secure longframes, fast downloads, repeater function, range up to 30 m.

6-fold KNX push-button interface for binary input/output with KNX Data Secure, temperature measurement, LED control and flexible function assignment.