Theben

.KNX actuator with temperature control, 2 inputs, 220 N force, auto valve adjustment. Includes VA 10 and 100 for M30x1.5 and Danfoss. Ideal for heating/cooling.

Fan coil actuator for 2- and 4-pipe systems with 3 fan speeds, 0–10 V control, relay output, condensate monitoring, manual control, and temperature compensation.

4-channel 16 A switch actuator, base module for MIX2. Manual operation, status LEDs and logic functions. Expandable to 12 channels with MIX/MIX2 modules. Suitable for various load types.

4-channel switch/dimming actuator for 0–10 V or 1–10 V control. Flexible use of control and relay outputs. Supports color control, KNX Data Secure. Type FIX1.

PIR presence detector for corridor ceiling mounting, rectangular detection area 28 x 5 m, for KNX bus system, with light and presence channels, spring clips, and integrated temperature sensor.

KNX dim actuator with 4 channels for R, L, C loads. Dimming range 5–400 W/VA per channel or 800 W/VA in parallel. Supports LED, halogen, CFL. Manual control.

Supplies and monitors KNX bus with 640 mA and 30 V DC. Features reset button, short-circuit protection, and DIN rail mounting. Ideal for larger KNX lines.

Four-channel KNX pushbutton interface with binary inputs/outputs, temperature sensor inputs, flexible LED control and Data Secure. For flush mounting.

Dual pushbutton interface for KNX with binary input/output, Data Secure, flexible LED control and free function assignment. Fits flush-mounted boxes. IP20, max. 2 inputs.

Wall-mounted presence detector with 170° coverage, 2 light and 2 HVAC channels, integrated sensors and KNX Data Secure. Suitable for flexible lighting and climate control.

Switch actuator with 4 C-load channels (16 A), current detection and manual control. Suitable for high lamp loads, expandable to 12 channels, DIN rail mounting, KNX compatible.

Flush-mounted dim actuator with 1 channel, auto load detection, adjustable dim curve, binary inputs, and KNX Data Secure. Supports LED, halogen, and transformers.

Combi sensor for wind, light and temperature. Ideal for automatic shading of up to 3 façades. Includes threshold channels, logic and KNX integration.

Power extension for universal dimming actuators. Increases dimming power by 300 W/VA per channel. Up to 4 boosters (max. 2000 W/VA). Requires MIX2 base module.

DALI-2 certified gateway with 1 channel for 64 DALI luminaires. (16) groups, (16) scenes, effects, color control (DT8). Easy setup and ballast replacement via ETS DCA.

Surface-mount housing for LUXA 103 B KNX and LUXORliving BI360 presence detectors. Available in white, grey, or black. Easy ceiling or wall installation.

230 V thermoelectric actuator for radiators or manifolds. With first-open function, 100 N force, IP54, snap-on mounting, leak and overvoltage protection.

KNX RF push-button switch actuator with 4 touch points, fits 55 mm frames. Supports KNX Data Secure. Ideal for retrofitting conventional installations.

4-channel DALI actuator (gateway) with KNX interface. DALI-2 certified, controls 4×30 devices via Broadcast. Supports color and color temperature (DT8).

2-channel 1–10 V control unit for dimming/switching EVG and LED gear. MIX base module, expandable to 6 channels. Manual control and status LEDs.

8-channel KNX switch actuator 16 A as MIX2 extension module. Expands a base module with 8 channels. Only usable with a MIX2 base module.

KNX ceiling sensor with 30×5 m rectangular range, 2 zones, 4 channels, walk-through light, constant lighting control, scenes and manual override.

Outdoor sensor for measuring light and temperature. Includes 5 configurable channels for automatic control of shading, lighting and temperature.

Touch sensor with 4 buttons, status LEDs and temp. sensor. Available in white, black and silver. Supports KNX Data Secure and various control functions.