Collection

The AKD-0424V.02 LED Controller dims 12/24V LED lamps with 4 channels, offering Tunable White and RGBW modes, with variable dimming speeds and automation.

The AKK-1616.03 switch actuator from the AKK series offers 16 independent channels for medium loads. With 16 A capacity and 70 µF C-load, fast configuration via KNX bus, extensive scene and time functions.

The SCN-SAFE.01 module enhances KNX line security by blocking programming and unloading. Easy integration with automatic activation and device monitoring.

4-channel DALI actuator (gateway) with KNX interface. DALI-2 certified, controls 4×30 devices via Broadcast. Supports color and color temperature (DT8).

Fan coil actuator for 2- and 4-pipe systems with 3 fan speeds, 0–10 V control, relay output, condensate monitoring, manual control, and temperature compensation.

2-channel 1–10 V control unit for dimming/switching EVG and LED gear. MIX base module, expandable to 6 channels. Manual control and status LEDs.

Base module with 8x switching (16 A) or 4x blind channels. Flexible use, expandable to 24 channels. Manual control and status LEDs. Suitable for standard loads, KNX Data Secure.

12-channel KNX heating actuator/regulator with 12 P/PI controllers for 12 thermal actuators (24–240 V AC), in 4 groups. Includes protection, LED display, manual control.

Multimaster DALI-2 gateway with 1 channel for 64 devices, KNX Data Secure, DALI-2 sensors, push buttons, DT8 color control, scenes, MQTT and ETS DCA.

Round indoor KNX clock with white dial (Ø 300 mm), black numerals, black hour and minute hands, red second hand. Impact-resistant plastic housing with matt plexiglass.

Compact KNX USB interface between PC and KNX bus, ETS ready, supports KNX long frames, galvanic isolation, BAOS V2, HID/cEMI, DIN rail mount.

Line coupler for connecting and galvanically separating KNX lines. Supports Long Frames (from ETS 5), Data Secure, and repeater functionality.

Secure KNX-IP interface supporting KNX IP Secure, 5 tunneling servers, firmware updates via Theben IP Tool, powered by 12–30 V DC or PoE.

Supplies KNX bus with 1280 mA, 30 V DC. Basic system voltage monitoring, reset button and short-circuit-proof. DIN rail mounting, 4 modules.

Connects KNX-RF to KNX TP, powered via bus, supports KNX Secure longframes, fast downloads, repeater function, range up to 30 m.

Combi sensor for wind, light and temperature. Ideal for automatic shading of up to 3 façades. Includes threshold channels, logic and KNX integration.

Compact KNX-Modbus gateway for Modbus TCP. Up to 250 data points, master/slave, KNX Security, local control, tunneling interface, powered via KNX bus.

Duct temperature sensor with fast response, integrated control and flange mount. For HVAC, heating, cooling, fan control and temperature alerts via KNX.

Heating actuator for 12 circuits, switching via 24 V DC or 0–10 V DC. No KNX thermostat needed. With 2 pump controls, wall mounting and power supply.

Gateway for KNX integration with Fujitsu, General, Hiyasu, and Fuji Electric AC units. Bidirectional communication via CN65 connector, 2 analog/digital inputs, and KNX Secure support. Compact design for installation in junction or wall boxes.

4-channel KNX Secure shutter actuator with manual control, 20 logic functions, and data retention during bus failure. Suitable for DIN rail mounting. Ideal for efficient blind or shutter control.

The Zennio Presentia W1 v2 is a KNX motion detector for flush mounting, with 1 push button. Detects motion up to 10 meters, with adjustable sensitivity and backlighting.

Actuator for ducted air conditioning with 4 zones, controls motorized grilles, 12-24 VDC. Manage up to 12 zones with additional modules. Manual control and LED status indicators.

Controller for 2/4-pipe fan-coil units with 0-10 V fan control. 4 multifunction outputs, 4 analog/digital inputs, 2 thermostats, DIN rail mounting.