Dinuy

Interface with 4 channels that can function as binary input or LED output. Potential-free inputs can control switches, dimmers, scenes, blinds, or impulse counters via ETS4 or later.

Wireless sensor for temperature, humidity, and brightness. Easy installation without KNX bus cables. Compatible with ETS5 for advanced configuration. Battery life >8 years.

Wireless KNX-RF multisensor for temperature, brightness, and humidity. Programmable with ETS5, featuring alarms for overheating, sun protection, and humidity. Battery-powered with a lifespan of over 8 years.

Wireless door/window contact sensor for detecting open/closed status. Battery-powered (life >12 years). KNX-RF S-Mode, configurable via ETS5.

Dimmable KNX-RF actuator for DALI drivers, perfect for wireless installation upgrades. Includes scenes, adjustable dimming levels, soft on/off functions, and emergency behavior.

16-channel switch/blind actuator with 23 inputs (16 binary + 7 binary/analog). Handles high loads (16A). Configurable via ETS5.

4-channel dimming actuator for LED strips with PWM technology, KNX compatible. Suitable for RGBW, constant voltage 12-48V, max. 10A per channel, DIN-rail mounting.

1-channel wireless KNX-RF switching actuator for switching or timing functions. Supports KNX-RF system mode and programmable via ETS5. Max switching: 16A.

Surface-mounted 360° KNX motion and presence detector with PIR technology, 6 channels, constant brightness control, light and temperature sensor, Master/Slave function and full ETS configuration.

Wireless KNX-RF motion sensor with PIR technology and daylight sensor. Recessed ceiling mount, battery-powered with >10 years lifespan. 360º detection, Ø7m range at 2.5m height. Programmable via ETS5.

Universal dimmer with one channel for LED, halogen, and incandescent lamps. Suitable for leading or trailing edge, max. 1000W load. DIN-rail mounting.

Wireless RF-KNX pushbutton with 1 channel, perfect for switching, dimming, shutter control, or scene launching. Battery-powered, easy to install, compatible with KNX systems.

Wireless KNX-RF temperature sensor with external probe. Ideal for underfloor heating. Includes thermostat function, overheat and cooling alarm. Powered by 230 V. Setup via ETS5 or higher.

4-channel multifunctional switch or 2-channel blind actuator with 12 inputs, including 8 binary and 4 binary/analog inputs. Supports high loads, logic functions, and manual control. Programmable via ETS5.

Wireless KNX-RF interface with 2 channels for switching, dimming, or blinds control. Easy installation without wiring, includes temperature and battery status sensor. Programmable with ETS5 or higher.

Discreet flush-mounted KNX 360° PIR detector for motion and presence. Features light and temperature sensors, constant light control, 6 channels and master/slave. Ideal for lighting and HVAC control.

Kompakter KNX 180° Bewegungs- und Präsenzmelder für Wandmontage mit dualen PIR-Sensoren, Konstantlichtregelung, 6+1 Kanälen sowie Licht- und Temperatursensor. Unterstützt Licht- und HVAC-Steuerung. Für Innen- und Außenecken geeignet.

Compact KNX detector with 270° coverage for wall or ceiling installation. Supports motion, presence, constant light control and twilight function. Includes 6 channels, master/slave mode, and built-in light and temperature sensors.

Capacitive switch with 4 buttons, RGB lighting, temperature and thermostat function. Fully customizable via ETS programming. Suitable for lighting, blinds, and scenes. Includes temperature sensor.

Multifunctional actuator for 2 switching channels or 1 blind/awning channel. Capacity up to 16A per channel, KNX compatible, manual control, and ETS3 or later programmable

Compact KNX corridor motion and presence detector with dual PIR sensors, 360° coverage, 6 channels and constant brightness control. Ideal for corridors and long passageways.

Capacitive switch with 8 touch buttons, temperature and light sensors, and thermostat function. Black glass, copper frame. For lighting, blinds, and scene control.

Wireless KNX-RF S-Mode dimmer for RGB LED strips. 3 channels for RGB or single-colored LED strips with PWM control. Configurable via ETS5, with analog and digital inputs.

Wireless dimmer for 1-10V ballasts or LED drivers. Compatible with KNX-RF Easy Mode. Perfect for junction box installation. Supports wireless and wired control.