Collection

Pipe nipple with integrated temperature sensor for analog/digital inputs. Available for ½” and ¾” pipes. Ideal for precise temperature measurement.

Constant Current (CC) LED dimmer with 3 channels (220-1000 mA) for RGB or individual channels. KNX compatible with a test button and surface mounting.

Gateway for bidirectional KNX control of Fujitsu, General, Hiyasu, and Fuji Electric air conditioners via 3-wire connection. Includes 3 inputs and logic functions.

Industrial actuator with 4 relay outputs (20 A) and current measurement. Supports KNX Secure, manual control, phase connection, and logical functions. For DIN-rail mounting.

1-gang capacitive KNX touch sensor for 55×55 mm frames with RGB backlight, acoustic feedback, built-in thermostat, temperature sensor, 2 inputs and full KNX Secure support.

Capacitive touch sensor with 6 touch zones, customizable icons, and backlighting. Integrated sensors for brightness, proximity, and temperature. Available in white, silver, anthracite, or custom design. Compatible with 70x70 mm frames.

Micro presence detector with temperature and brightness sensor, designed for suspended ceilings. Features intelligent auto/manual mode switching. KNX Secure for enhanced security. Available from Q4 2025.

Presence detector for ceiling installation, 360° detection angle, IP44 protection. Detection range 9m, presence 5m. 2 sensors, 2 light channels, 1 HVAC channel, alarm. Suitable for wet rooms. Includes LED nightlight.

The 6-fold temperature controller provides flexible control of heating and cooling with adjustable modes like PI, two-step, and PWM. Includes frost protection, integrated bus coupler, and status feedback.

Switch actuator with 6 outputs for industrial use. Provides precise active power measurement, current measurement per channel, time functions, and integrated logical links. Manual operation via buttons.

The Glass LED Indicator features 12 independently switchable RGB LEDs and logical functions for displaying status information like doors and windows. Fits 55mm systems.

The 2-channel KNX Universal Dimming Actuator dims various lamps like LEDs and halogen. With KNX Data Secure for reliable operation and security. Supports 2 dimmable channels, bus voltage 21-30V DC, power 300W per channel.

This gateway provides seamless communication between KNX and BACnet networks, supports 250 BACnet objects, 455 COV subscriptions, and KNXnet/IP tunneling. Ideal for visualization and remote access via Ethernet.

Flexible KNX switch actuator with 3 outputs, suitable for various loads. Expandable to 15 outputs with extension modules. Supports direct and bus operation.

This switching actuator provides eight potential-free outputs for switching electrical loads. Suitable for switching capacitive, inductive, and resistive loads. Diagnostic functions and configuration via KNX.

Combination sensor for brightness and temperature, offers automatic shading and lighting control. Measurement range: temperature -25°C to +55°C, brightness 1-100,000 Lux. IP54, for outdoor mounting.

KNX heating actuator with 4 outputs for 24 VAC/DC valves. Features short-circuit protection, independent thermostats, and logic functions.

Compact KNX switch actuator with 1 bi-stable relay (230 V/16 A) and 2 binary inputs (12-230 V). Supports scenes, staircase lighting, heating, and zero-crossing detection.

Reliable 120W LED driver with 24V constant voltage output, PWM dimming technology, and KNX compatibility. Ideal for precise light control in low-light environments, suitable for indoor use.

Serial RS-232 interface for seamless integration of non-KNX devices into KNX networks, supports FT1.2 and BAOS protocol. Easy installation, powered by KNX bus.

The VisuControl glass frame provides a stylish finish for the VisuControl touch panel. Available in white, black, and brushed stainless steel. Ideal for wall mounting and fits 7" and 10" panels perfectly.

The KNX RF+ Push-button Plus sends KNX telegrams wirelessly. Programmable for 1 or 2 button operation, with status and orientation LEDs. Ideal for replacing conventional buttons without KNX wiring.

The Central Operation Unit Smart controls your smart home with direct functions, menu options, and a large color display. Automatic shading and temperature regulation for maximum comfort.

Make conventional switches, buttons, and contacts "smart" with 8 inputs, including logic modules, scene management, and KNX bus support.