Dinuy

Wireless sensor for temperature, humidity, and brightness. Easy installation without KNX bus cables. Compatible with ETS5 for advanced configuration. Battery life >8 years.

4-channel dimming actuator for LED strips with PWM technology, KNX compatible. Suitable for RGBW, constant voltage 12-48V, max. 10A per channel, DIN-rail mounting.

Kompakter KNX 180° Bewegungs- und Präsenzmelder für Wandmontage mit dualen PIR-Sensoren, Konstantlichtregelung, 6+1 Kanälen sowie Licht- und Temperatursensor. Unterstützt Licht- und HVAC-Steuerung. Für Innen- und Außenecken geeignet.

Wireless KNX-RF multisensor for temperature, brightness, and humidity. Programmable with ETS5, featuring alarms for overheating, sun protection, and humidity. Battery-powered with a lifespan of over 8 years.

Wireless door/window contact sensor for detecting open/closed status. Battery-powered (life >12 years). KNX-RF S-Mode, configurable via ETS5.

16-channel switch/blind actuator with 23 inputs (16 binary + 7 binary/analog). Handles high loads (16A). Configurable via ETS5.

Dimmable KNX-RF actuator for DALI drivers, perfect for wireless installation upgrades. Includes scenes, adjustable dimming levels, soft on/off functions, and emergency behavior.

Universal 8-channel dimmer actuator for LED, halogen, and incandescent lamps. Supports phase-cut dimming (leading/trailing edge), with 4W to 250W per channel, programmable via ETS5.

Wireless KNX-RF temperature sensor with external probe. Ideal for underfloor heating. Includes thermostat function, overheat and cooling alarm. Powered by 230 V. Setup via ETS5 or higher.

Wireless KNX-RF motion sensor with PIR technology and daylight sensor. Recessed ceiling mount, battery-powered with >10 years lifespan. 360º detection, Ø7m range at 2.5m height. Programmable via ETS5.

Compact KNX detector with 270° coverage for wall or ceiling installation. Supports motion, presence, constant light control and twilight function. Includes 6 channels, master/slave mode, and built-in light and temperature sensors.

Interface with 4 independent channels working as binary or analog inputs. Ideal for lighting, blinds, temperature measurement, impulse counting, and thermostat control.

KNX-RF Easy Mode
Universal RF Easy Mode dimmer for wireless or wired control of dimmable LEDs, halogen, and incandescent lamps. Suitable for leading and trailing edge technology, max coverage of 100m.

Remote control for lighting and shutters. Supports 5 channels and scenes. RF-KNX compatible. Battery-powered, lasts >8 years. Ideal for dimming, switching, and scenes.

Universal 4-channel dimming actuator for LED, halogen, and incandescent lamps. Supports phase-cut and phase-dim technologies. Protected against overload and short circuits. DIN-rail mounted.

8-channel actuator for switching or 4-channel blinds with 12 inputs. Programmable via ETS5, supports high loads (up to 16A) and offers various logic functions.

Compact KNX corridor motion and presence detector with dual PIR sensors, 360° coverage, 6 channels and constant brightness control. Ideal for corridors and long passageways.

Dimmer for 12V-48V single-color LED strips with PWM dimming. Control via wireless or wired pushbutton. Max load 8A, RF Easy Mode compatible, KNX-RF supported. Junction box mounting.

Interface with 4 channels that can function as binary input or LED output. Potential-free inputs can control switches, dimmers, scenes, blinds, or impulse counters via ETS4 or later.

Surface-mounted 360° KNX motion and presence detector with PIR technology, 6 channels, constant brightness control, light and temperature sensor, Master/Slave function and full ETS configuration.

Wireless RF-KNX pushbutton with 1 channel, perfect for switching, dimming, shutter control, or scene launching. Battery-powered, easy to install, compatible with KNX systems.

1-channel KNX-RF dimmer for LED, halogen, and incandescent lamps. Supports leading- and trailing-edge dimming. Configurable dim levels, soft on/off, scenes. KNX-RF S-Mode.

Wireless dimmer for 1-10V ballasts or LED drivers. Compatible with KNX-RF Easy Mode. Perfect for junction box installation. Supports wireless and wired control.

Discreet flush-mounted KNX 360° PIR detector for motion and presence. Features light and temperature sensors, constant light control, 6 channels and master/slave. Ideal for lighting and HVAC control.